Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Coconut Creek, FL
Window installation in Coconut Creek typically runs $650-$1,400 per opening for standard vinyl or aluminum impact-rated units, with most condo jobs in Wynmoor Village and similar 55-plus communities requiring Miami-Dade NOA-approved products and Broward County HVHZ permitting. We start every job with a measured survey you keep, and the written quote matches that document exactly - Haven Clause 1. Call (561) 421-3844 to schedule your free estimate.
Most of the work we do in Coconut Creek involves replacing original single-pane aluminum frames and jalousie windows in 1970s-80s planned communities with modern impact-rated glazing that meets Florida’s High-Velocity Hurricane Zone standards. The salt-laden humidity this close to the Atlantic accelerates frame corrosion, particularly in older condo units whose windows have never been touched. Our crews coordinate dispatch from the Miami office and serve Coconut Creek locally.
Why Coconut Creek Homes Are Different
Coconut Creek’s housing stock is overwhelmingly concentrated in large planned 55-plus communities built during the 1970s and 1980s. Wynmoor Village alone contains thousands of condo units with original aluminum-framed, single-pane sliding glass doors and jalousie windows that predate Florida’s post-Hurricane Andrew building code overhaul. Every replacement in these communities requires two separate approval chains: Broward County’s HVHZ-specific permitting, which demands Miami-Dade Notice of Acceptance approval on all products, and a separate HOA architectural review sign-off.
The Wynmoor Village architectural committee meets on a fixed monthly schedule. Miss that deadline by a day, and the project slides back a full month before a permit can even be pulled. Experienced local window crews build that calendar into every sales quote to avoid callbacks from retired residents on tight budgets. Detached single-family homes in newer sections, built from the 1990s through 2000s, more often have original impact glass but may need seal failures or frame corrosion addressed. Sitting 5-6 miles inland, Coconut Creek still falls within the HVHZ designation requiring design wind speeds exceeding 170 mph - standards far exceeding most U.S. jurisdictions.
Our Main Coconut Creek Services
Most calls from Coconut Creek homeowners center on two needs: replacing original non-impact windows and doors in older condos, and upgrading to HVHZ-compliant products that lower insurance premiums.
Window Replacement in Coconut Creek
We replace original single-pane aluminum and jalousie windows throughout Coconut Creek’s 55-plus communities with impact-rated vinyl or aluminum units carrying Miami-Dade NOA approval. Every job includes the measured survey you keep, a written scope matching that document, and a documented photo record on completion. Window Replacement in Coconut Creek covers our full process for condo and single-family jobs.
Impact Windows & Doors in Coconut Creek
HVHZ-rated impact windows and doors are mandatory for any replacement in Coconut Creek, not optional. We specify PGT, CGI, and CWS lines by performance tier and price range, pulling Broward County permits and passing inspections under the Haven Standard. Impact Windows & Doors in Coconut Creek details our product lines and permitting process.
Sliding & Patio Doors in Coconut Creek
Original aluminum sliding glass doors in Wynmoor Village and similar communities are the weakest point in most Coconut Creek units - single-pane, non-impact, with corroded rollers and failed weatherstripping. We replace them with HVHZ-rated multi-slide or standard sliding systems from PGT and CGI, sized to the exact rough opening. Sliding & Patio Doors in Coconut Creek covers sizing, hardware, and HOA approval timing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Coconut Creek
Window installation in Coconut Creek means navigating two approval systems before a frame is lifted: Broward County HVHZ permitting requiring Miami-Dade NOA on every product, and HOA architectural review in communities like Wynmoor Village with fixed monthly meeting schedules. Most of our jobs here replace original single-pane aluminum or jalousie windows in 1970s-80s condos with impact-rated vinyl or aluminum units that meet the 170 mph design wind speed standard. We build that approval timeline into every quote so the measured survey and the final invoice remain the same document - no surprises, per Haven Clause 5. Window Installation covers our full product range and process.
Single & Double Hung Windows
Signs you need it
Original single-pane aluminum frames show corrosion at the sill, the sash won’t stay open without a prop, or you feel drafts around the meeting rail during a northeast wind.
What it costs in Coconut Creek
Single or double hung impact-rated window installation in Coconut Creek typically ranges $650-$1,100 per opening for standard sizes, with pricing set by the measured survey before work begins.
How we do it
We record the existing rough opening dimensions and frame condition during the measured survey, specify the PGT or CGI unit with Miami-Dade NOA, pull Broward County HVHZ permit, and install with corrosion-resistant fasteners and approved flashing tape per the NOA detail.
Horizontal Roller Windows
Signs you need it
The roller carriage grinds or sticks, the lock bar no longer engages the keeper, or the single-pane glass transmits street noise from Lyons Road traffic.
What it costs in Coconut Creek
Horizontal roller impact window installation in Coconut Creek typically ranges $700-$1,200 per opening, with the written price fixed to the measured survey before any work starts.
How we do it
We measure the existing track width and sash weight during survey, specify the appropriate PGT or CWS roller system with Miami-Dade NOA, and install with new track caps and weep-hole drainage verified post-installation.
What Window Installation Costs in Coconut Creek
| Item | Typical range in Coconut Creek |
|---|---|
| Single or double hung impact window | $650 - $1,100 |
| Horizontal roller impact window | $700 - $1,200 |
| 3-panel sliding impact window | $1,200 - $2,400 |
How long does window installation take in a Coconut Creek condo?
Most condo window replacements in Wynmoor Village and similar communities take one to two days for 6-10 openings, with HOA scheduling and Broward County HVHZ permitting adding 4-8 weeks to the front end. Call (561) 421-3844 for a measured survey and written timeline.
Will the HOA approve any impact window I choose?
No - Wynmoor Village and most Coconut Creek 55-plus communities require architectural committee sign-off on frame color, grid pattern, and operation style before permitting, so we include HOA submission in our project timeline. Call (561) 421-3844 and we’ll review your community’s architectural guidelines.
Door Installation in Coconut Creek
Door installation in Coconut Creek focuses on replacing hollow-core or non-impact entry doors in 1970s-80s condos and upgrading single-family homes to HVHZ-compliant systems that satisfy insurance inspections. The original doors in Wynmoor Village and similar communities lack impact rating, proper weatherstripping, and often show frame rot from decades of salt-laden humidity. We measure the rough opening, jamb depth, and hinge locations during survey, then specify Therma-Tru or CGI entry systems with Miami-Dade NOA and written pricing before any work begins. Door Installation covers our full range of entry, patio, and specialty door systems.
Entry Doors
Signs you need it
The door slab feels hollow when knocked, daylight shows around the jamb, or the deadbolt no longer seats cleanly in the strike plate.
What it costs in Coconut Creek
Entry door installation in Coconut Creek typically ranges $1,400-$3,200 including impact-rated slab, frame, and hardware with Miami-Dade NOA.
How we do it
We measure rough opening, jamb depth, and swing clearance during survey, specify the Therma-Tru or CGI system with proper HVHZ rating, and install with composite or pressure-treated jamb material and three-point locking hardware.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your insurance inspection flagged the entry door as non-compliant, or you’re replacing a decorative glass unit that lacks impact rating with a HVHZ-approved system.
What it costs in Coconut Creek
Hurricane-proof front door installation in Coconut Creek typically ranges $2,200-$4,800 depending on glass size, decorative inserts, and sidelight configuration.
How we do it
We verify the design pressure rating required for your Coconut Creek exposure category, specify PGT or CGI impact-rated door and glass with Miami-Dade NOA, and install with HVHZ-approved anchoring and flashing per Broward County inspection protocol.
What Door Installation Costs in Coconut Creek
| Item | Typical range in Coconut Creek |
|---|---|
| Standard entry door replacement | $1,400 - $3,200 |
| Hurricane-proof front door with impact glass | $2,200 - $4,800 |
| French or double door system | $2,800 - $5,500 |
Do I need HOA approval to replace my front door in Wynmoor Village?
Yes - Wynmoor Village’s architectural committee requires pre-approval of door style, color, and hardware finish before any exterior door replacement, with submissions due before the monthly meeting. Call (561) 421-3844 and we’ll coordinate your HOA package.
Can you match my condo’s existing door color for HOA compliance?
We specify Therma-Tru and CGI doors in standard HOA-approved colors for Coconut Creek communities, with paint-grade options available for exact color matching when required. Call (561) 421-3844 to review your community’s color schedule.
Energy-Efficient Windows in Coconut Creek
Energy-efficient windows in Coconut Creek address the specific penalty of original single-pane aluminum frames in 1970s-80s condos, where unconditioned air transfers through metal framing and failed glazing seals drive cooling costs upward. The Florida sun bearing down on west-facing units in Wynmoor Village and similar communities creates measurable heat gain that modern low-E coatings and argon gas fills reduce substantially. We specify energy-efficient upgrades by performance data - U-factor and SHGC - not by brand preference, with written pricing tied to the measured survey before any work begins. Energy-Efficient Windows covers our full range of glazing options and performance tiers.
Low-E & Argon Gas Glass
Signs you need it
Your west-facing rooms stay uncomfortably warm after 2 PM, or you can feel radiant heat through the glass even with blinds closed.
What it costs in Coconut Creek
Low-E and argon gas upgrade for impact-rated windows in Coconut Creek typically adds $80-$150 per opening to the base window price.
How we do it
We calculate the solar heat gain coefficient target for your exposure during survey, specify the appropriate PGT or ES Windows low-E coating with argon fill, and verify the NFRC label matches the written scope before installation.
ENERGY STAR Replacement Windows
Signs you need it
Your FPL bills spike June through September, or you’re replacing windows as part of a broader energy improvement to meet current rebate criteria.
What it costs in Coconut Creek
ENERGY STAR certified impact window installation in Coconut Creek typically ranges $750-$1,350 per opening, with performance data documented on the NFRC label.
How we do it
We verify the ENERGY STAR climate zone rating for South Florida, specify CWS or ECO Window Systems products meeting that criteria with Miami-Dade NOA, and include the NFRC documentation in your project file.
What Energy-Efficient Windows Costs in Coconut Creek
| Item | Typical range in Coconut Creek |
|---|---|
| Low-E/argon upgrade per opening | +$80 - $150 |
| ENERGY STAR impact window | $750 - $1,350 |
| Insulated laminated glass upgrade | +$120 - $220 |
Will energy-efficient windows lower my FPL bill in Coconut Creek?
Most Wynmoor Village residents see measurable cooling load reduction after replacing single-pane aluminum with low-E impact windows, though exact savings depend on exposure, shading, and existing insulation. Call (561) 421-3844 for a measured survey and written performance estimate.
Do energy-efficient windows still meet HVHZ requirements?
Yes - all energy-efficient windows we specify in Coconut Creek carry Miami-Dade NOA for HVHZ compliance, with low-E coatings applied to the laminated impact glass itself. Call (561) 421-3844 to review U-factor and SHGC options.
Impact Garage Doors in Coconut Creek
Impact garage doors in Coconut Creek protect a vulnerable opening that original construction often left with non-rated panels, particularly in 1970s-80s condos and townhomes where the garage faces prevailing winds. The HVHZ designation here requires garage doors to withstand design wind speeds exceeding 170 mph, yet many original installations lack proper wind-load certification or have corroded tracks from decades of salt-laden humidity. We measure the opening, calculate the required design pressure, and specify wind-rated systems with Miami-Dade NOA, with written pricing fixed before any work begins. Impact Garage Doors covers our full range of hurricane-rated and energy-efficient garage door systems.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door lacks a wind-load sticker, the panels rattle in moderate winds, or your insurance inspection specifically flagged the garage opening.
What it costs in Coconut Creek
Hurricane-rated garage door installation in Coconut Creek typically ranges $1,800-$3,800 for a standard two-car opening with wind-load certification and Miami-Dade NOA.
How we do it
We measure the opening and calculate the design pressure for your Coconut Creek exposure category during survey, specify the PGT or Mr-Glass wind-rated system with reinforced track and hardware, and install with HVHZ-approved anchorage verified by Broward County inspection.
Wind-Load Code Compliance
Signs you need it
You’re selling or refinancing and the buyer’s inspection noted non-compliant garage door, or Broward County flagged the opening during a post-storm damage assessment.
What it costs in Coconut Creek
Wind-load code compliance upgrade for existing garage doors in Coconut Creek typically ranges $900-$2,200 depending on whether the track and hardware can be retrofitted or full replacement is required.
How we do it
We inspect the existing door, track, and jamb condition during survey, calculate the required design pressure for your specific Coconut Creek address, and specify either a retrofit kit with Miami-Dade NOA or full replacement with written scope and fixed pricing.
What Impact Garage Doors Costs in Coconut Creek
| Item | Typical range in Coconut Creek |
|---|---|
| Hurricane-rated garage door replacement | $1,800 - $3,800 |
| Wind-load retrofit of existing door | $900 - $2,200 |
| Energy-efficient insulated garage door | $2,200 - $4,200 |
Does my garage door need Miami-Dade NOA like my windows?
Yes - garage doors in Coconut Creek’s HVHZ zone require Miami-Dade Notice of Acceptance for the complete assembly including door, track, and hardware, not just the panel itself. Call (561) 421-3844 for a measured survey and written specification.
Can you upgrade my garage door for wind load without replacing it?
Sometimes - if the existing door slab is in good condition, we can specify a wind-load retrofit kit with reinforced track, struts, and hardware carrying Miami-Dade NOA; we determine this during the measured survey. Call (561) 421-3844 for an evaluation.
Custom & Geometric Windows in Coconut Creek
Custom and geometric windows in Coconut Creek solve the mismatch between standard replacement sizes and the shaped openings found in 1970s-80s architecture, particularly in Wynmoor Village and similar communities where arched transoms, octagonal accent windows, and raked openings were common design elements. These original units were single-pane and non-impact, yet their irregular shapes prevent direct replacement with stock sizes. We field-measure each opening, template the radius or angle, and specify custom impact-rated units from PGT or ViewLux with Miami-Dade NOA, with written pricing fixed to that measured survey before fabrication begins. Custom & Geometric Windows covers our full custom capabilities and templating process.
Geometric & Shaped Windows
Signs you need it
Your triangular, trapezoid, or octagonal window has cracked single-pane glass, or the aluminum frame shows corrosion at the miter joints where water ponds.
What it costs in Coconut Creek
Geometric and shaped impact window installation in Coconut Creek typically ranges $1,400-$3,200 per opening depending on complexity, with templating and fabrication time built into the written quote.
How we do it
We create a field template of the exact opening geometry during survey, transmit the template to PGT or ViewLux for custom fabrication with Miami-Dade NOA, and install with custom flashings cut to the specific angle or radius.
Arched & Curved Windows
Signs you need it
The radius top of your arched window has separated from the rectangular sash below, or the curved glass shows condensation between failed single-pane lites.
What it costs in Coconut Creek
Arched and curved impact window installation in Coconut Creek typically ranges $2,200-$4,800 per opening, with the radius template and custom jamb extension included in the written scope.
How we do it
We measure the spring-line, rise, and radius with a field template during survey, specify the PGT or ViewLux custom arched unit with Miami-Dade NOA, and fabricate the curved head jamb to match the existing masonry or stucco profile.
What Custom & Geometric Windows Costs in Coconut Creek
| Item | Typical range in Coconut Creek |
|---|---|
| Geometric or shaped impact window | $1,400 - $3,200 |
| Arched or curved impact window | $2,200 - $4,800 |
| Oversized custom impact opening | $3,500 - $7,500 |
How long does custom window fabrication take for Coconut Creek?
Custom geometric and arched windows from PGT and ViewLux typically require 6-10 weeks from templating to delivery, with HOA and permit timing running parallel; we build this into your written project schedule. Call (561) 421-3844 for a measured survey and timeline.
Can you match the grid pattern on my custom window for HOA approval?
Yes - we document your existing grid pattern, muntin width, and color during the measured survey, and specify matching SDL or GDL grids on the custom replacement unit for architectural committee submission. Call (561) 421-3844 to review your HOA requirements.
Brands We Service in Coconut Creek
We install and service PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux in Coconut Creek, with parts and hardware stocked locally for faster turnaround on warranty and service calls. our brands details our full manufacturer relationships and product tiers.
Pricing for Windows & Doors in Coconut Creek, FL
| Service | Typical range in Coconut Creek |
|---|---|
| Single/double hung impact window | $650 - $1,100 |
| Horizontal roller impact window | $700 - $1,200 |
| 3-panel sliding impact window | $1,200 - $2,400 |
| Standard entry door replacement | $1,400 - $3,200 |
| Hurricane-proof front door | $2,200 - $4,800 |
| French or double door system | $2,800 - $5,500 |
| Low-E/argon energy upgrade | +$80 - $150 |
| ENERGY STAR impact window | $750 - $1,350 |
| Hurricane-rated garage door | $1,800 - $3,800 |
| Geometric shaped impact window | $1,400 - $3,200 |
| Arched/curved impact window | $2,200 - $4,800 |
Prices in Coconut Creek push toward the higher end when HOA architectural review requires custom color matching, when existing frame corrosion demands jamb replacement beyond standard installation, or when Broward County HVHZ inspection reveals unpermitted prior work that must be brought to code. The written price from our measured survey is the price on the final invoice - Haven Clause 1, no change orders.
Neighborhoods We Serve in Coconut Creek
We serve window and door installation across Coconut Creek’s full range of housing types, from the large 55-plus condo communities to newer single-family sections. Crews dispatch from our Miami office and typically schedule Coconut Creek projects within standard Broward County response windows.
- Wynmoor Village
- Coco Lakes
- Winston Park
- Sandalfoot Cove
- Turtle Run
Service Area - Cities Near Coconut Creek
Our crews serve the full Broward and northern Palm Beach corridor from the Miami office, with regular projects in Pompano Beach, FL, Deerfield Beach, FL, Boca Raton, FL, and Delray Beach, FL. Each city carries its own HVHZ requirements, permit timelines, and HOA landscapes; we adjust our measured survey and project scheduling accordingly.
Serving Coconut Creek, FL - Our Local Coverage Area
We’re based in the Coconut Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Coconut Creek
Wynmoor Village’s architectural committee meets monthly on a fixed schedule, so missing the submission deadline by even one day delays approval a full month; we build this calendar into every Coconut Creek quote and handle the package submission as part of our standard process.
We pull all HVHZ permits as part of our standard scope - the homeowner receives the permit card and inspection results, but we manage the application, scheduling, and passage under the Haven Standard’s documented evidence requirement.
Yes - bring us any written estimate from another Coconut Creek window or door contractor and we will review the product specification, scope, and pricing at no charge, per our standard policy since 2012.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Coconut Creek Customers Say
"The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.