Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCWS Windows & Doors in Delray Beach, FL | Sightline Windows & Doors Boynton Beach
We provide independent Delray Beach Window Replacement CWS sales and service, handling everything from Series 5000 single hung replacements to full-frame impact door installs. The one thing that makes our CWS work here different: Delray Beach’s east-side historic districts and coastal properties must satisfy both Historic Preservation Board review and Palm Beach County’s 160-175 mph wind-load code, a dual-compliance step that out-of-area contractors routinely underestimate. If you need CWS work in Delray Beach, call us at (561) 421-3844 to schedule your free estimate.
Why Delray Beach Residents Choose Us for CWS Service
We are not a CWS-authorized dealer. We are an independent service provider that works on CWS products daily, and that independence matters in Delray Beach. Manufacturer-authorized crews often push full replacements by default; we assess whether an OEM part repair preserves your impact rating and finish warranty, or whether corrosion or seal failure makes replacement the honest recommendation.
Sonia Raman, who leads our crew, grew up in Miami and learned glazing and frame installation through Miami Dade College’s building trades program before spending two decades on actual job sites. She keeps a running list of every window she has ever had to pull and replace because a previous installer used the wrong sealant. It is longer than she would like. That list is why she checks her own crew’s caulk joints before any truck leaves a site. “Measure it right the first time and the install is already half done.” That principle governs how we handle CWS sales & service in Delray Beach.
Our technicians are background-checked, uniformed, and identified by license number before arrival, per Haven Clause 3. Every job leaves a documented photo record. Every quote is written and matches the measured survey you keep. We answer calls live, 24/7.
Common CWS Windows & Doors Problems We Solve in Delray Beach
- Corroded aluminum frames and seized hardware on A1A-corridor properties. Direct Atlantic exposure east of Federal Highway attacks CWS aluminum frames, hinges, and rollers. Salt-air corrosion turns smooth-operating Series 7000 horizontal rollers into stuck sashes and compromises the marine-grade finish. We replace with stainless-steel or marine-grade hardware where OEM parts won’t survive the cycle.
- Glazing gasket degradation and fogging in east-side impact units. The salt air and UV load on barrier-island homes accelerates seal failure in CWS impact windows. Once the glazing gasket degrades, the unit loses its impact rating and visible moisture appears between panes. We source OEM CWS glazing to preserve the rating, or recommend full replacement if the frame is too far gone.
- Water intrusion behind stucco from improper flashing on CBS ranch replacements. Delray Beach’s 1950s-1970s concrete block stucco homes near Lake Ida often have original installations without proper sill pans. When we replace CWS sliding glass doors on these properties, we install full flashing and sill pan systems to stop water from migrating behind the stucco, a failure mode that can go undetected for years.
- Misaligned impact units in non-standard jalousie openings. Older beach cottages east of Federal Highway have narrow bays sized for louvered blades, not standard sash dimensions. Out-of-area contractors who quote standard CWS replacement pricing frequently discover the mismatch on-site. We measure rough openings during our survey and modify or specify custom-sized units before ordering.
- HOA color and profile rejections in western Delray gated communities. The 1990s-2000s HOA communities west of I-95 often restrict product color, frame profile, and visible hardware finish. We verify association requirements before specifying CWS products to avoid install-day rejections.
Before
AfterCWS Service in Delray Beach: What Local Conditions Mean for Your Equipment
Delray Beach’s designated historic districts, including the Old School Square area and the Marina Historic District, impose a requirement that does not exist in neighboring Boynton Beach or western Boca Raton: window and door replacements must pass Historic Preservation Board review for period-appropriate profiles and materials, while simultaneously satisfying Palm Beach County’s Florida Building Code impact-resistance mandates. This means a CWS Series 5000 impact single hung specified for a Marina District property must match the sightline and divided-light pattern the Board approves, not merely the performance spec the code demands. The wind-load requirement is 160-175 mph depending on coastal proximity. The aesthetic requirement is enforced by a separate board with its own submission timeline. We have handled this dual compliance on multiple Delray Beach properties, and we build both Impact Windows & Doors - Delray Beach solutions to match. review cycles into our project schedule so the job does not stall waiting for a second approval. Generic impact-window contractors who treat Delray Beach as a standard Palm Beach County tract-home market often discover the Historic Preservation step after materials are ordered.
CWS Models & Products We Service in Delray Beach
We work on the full CWS impact product line, with particular depth on the units most common in Delray Beach coastal and historic-district properties:
- CWS Series 5000 Impact Single Hung - Specified frequently for historic-district retrofits where the vertical sightline must match original double-hung proportions; available with custom grille patterns for Board approval.
- CWS Series 7000 Impact Horizontal Roller - Common in 1970s-1980s ranch additions and patio conversions; salt-air corrosion of the roller track is the typical failure we address east of Federal Highway.
- CWS Impact Sliding Glass Door - Full-frame replacement on CBS ranch homes requires proper sill pan and flashing integration with existing stucco; we document this step in every photo record.
- CWS Vinyl Impact Casement - Less common in Delray Beach’s historic stock but specified for some western HOA communities where crank-out operation meets association design guidelines.
We stock marine-grade and stainless-steel hardware for salt-air applications and source OEM CWS replacement parts to preserve impact ratings and finish warranties. If a frame is corroded beyond safe repair, we recommend full replacement with documented evidence, not a patch that fails in the next storm cycle.
CWS Service Pricing in Delray Beach
Pricing for CWS work in Delray Beach depends on three factors: whether the job requires Historic Preservation Board submission, whether the opening is standard or modified from original jalousie dimensions, and whether we are repairing with OEM parts or replacing full frames.
| Service | Typical Range |
|---|---|
| CWS hardware repair / roller replacement (single unit) | $180 - $340 |
| CWS glazing seal replacement (OEM gasket, per unit) | $260 - $480 |
| CWS Series 5000/7000 full-frame replacement (standard opening) | $890 - $1,450 |
| CWS impact sliding glass door replacement with sill pan | $2,400 - $4,200 |
| Historic Preservation Board submission and compliance documentation | $350 - $650 (added to project) |
| Custom-sized CWS unit for modified jalousie opening | Add 15-25% to standard frame price |
Every estimate begins with a measured survey you keep. The written quote cannot differ from that document. Call (561) 421-3844 for your free estimate - we will review your specific opening, your district requirements if applicable, and give you a line-item price before any work starts.
Serving Delray Beach, FL - Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Delray Beach
Yes. Properties in the Old School Square area, Marina Historic District, and other designated zones must submit window and door replacement plans for period-appropriate review before installation. This is separate from building permit approval and adds roughly 2-4 weeks to project scheduling. Call (561) 421-3844 and we will confirm whether your property falls under Board jurisdiction during our survey.
Yes, but the rough opening typically requires modification. Original jalousie bays are narrower than standard sash dimensions. We measure during our survey and either modify the opening or specify custom-sized CWS units. On a 1950s CBS ranch near Lake Ida, we replaced jalousie bays with custom CWS Series 5000 impact single hungs after rough-opening modification, securing both Historic Preservation Board approval and code compliance. Call (561) 421-3844 to schedule a survey of your specific openings.
Salt air corrodes aluminum frames, hinges, and rollers on oceanfront and A1A-corridor properties, leading to seized hardware and water infiltration. Standard aluminum hardware that lasts 15 years inland may fail in 7-10 years on barrier-island exposure. We use marine-grade or stainless-steel hardware replacements and recommend more frequent inspection schedules for coastal CWS installations.
Impact-rated glazing is legally required for all new and replacement window and door installations in Palm Beach County, not optional. The design wind speed zone for Delray Beach is approximately 160-175 mph depending on coastal proximity. Non-impact products do not meet Florida Building Code for this region. We specify CWS impact-rated products by performance tier and price range, not by what is in stock.
Yes. We work throughout Delray Beach service area including western gated communities with association approval processes. We verify HOA color, profile, and finish restrictions before specifying CWS products to avoid install-day rejections. Our documented photo record includes compliance verification for your association submission.
Service Areas Near Delray Beach
We handle CWS work across Palm Beach County from our Boynton Beach base. Nearby areas we serve include CWS service in Boynton Beach, CWS service in Lantana, Lake Worth, Greenacres, and Palm Springs. Each market has distinct compliance requirements; Delray Beach’s Historic Preservation Board dual-compliance is unique to its east-side districts.
Book Your CWS Service in Delray Beach Today
Call (561) 421-3844 to schedule your free estimate. We will bring the measured survey, the written price, and the documented photo record. Every job is governed by the Haven Standard and backed by our 365-Day Done Right Promise. If it is not done right, we make it right.
Written by Sonia Raman, Owner at Sightline Windows & Doors Boynton Beach, serving Delray Beach since 2012.