CWS Door Installation Nationwide | Sightline Windows & Doors Boynton Beach

CWS Door Installation: The Boynton Beach Owner’s Guide

CWS door installation in Boynton Beach typically runs $1,800-$4,200 for a standard single entry unit, depending on impact rating, frame material, and whether the opening needs structural reframing. We stock CWS-compatible frames, hardware, and sealant systems on our trucks, and most replacements are surveyed and installed within one to two business days. Most homeowners realize their CWS door is failing when the sweep drags, the multipoint lock won’t engage, or they spot daylight between the frame and the wall - usually after a storm season or once the original caulk line has hardened past its useful life.

Call (561) 421-3844

Which CWS Models This Applies To

CWS produces several door series common in Boynton Beach homes built between 2005 and 2020, and the right installation approach depends on which line you have. The CWS 1000 Series and 3000 Series entry doors are the two we encounter most: the 1000 uses a 4-9/16″ jamb depth with a composite frame, while the 3000 shifts to aluminum-clad with a thermal break and requires a wider rough opening. Check the hinge side of your door for a CWS label stamped with the series number and manufacturing date; if the label is painted over, measure the jamb depth and the wall thickness - 2×4 construction with 1/2″ drywall almost always means the 1000 Series, while 2×6 or block construction with furring points toward the 3000 or a custom order.

We are an independent service provider - not affiliated with CWS - so we source both OEM CWS frames and hardware and verified aftermarket equivalents that meet the same DP rating and AAMA certification. For impact-rated units, we specify OEM or equivalent-labeled products only; for non-impact replacements in interior-facing applications, a tested aftermarket frame can cut material cost by 20-30% without sacrificing performance. One compatibility gotcha we see in Boynton Beach: the 3000 Series multipoint lock hardware changed bolt spacing in 2017, so a pre-2017 door with failed lock hardware needs the older strike plate template or the new hardware won’t seat.

Signs Your CWS Door Installation Is Failing

• Dragging sweep or threshold gap. The adjustable sweep at the bottom of a CWS door compresses over time, especially in Boynton Beach where afternoon sun heats the slab and the sweep material takes a set. Once the gap exceeds 3/16″, you’re losing conditioned air and inviting water intrusion during driving rain.
• Multipoint lock misalignment. The top and bottom shootbolts no longer slide into their strikes without lifting or pressing the door. This usually means the frame has settled or the hinges have sagged - common in coastal fill soils near the Intracoastal, where minor structure shift is normal.
• Daylight visible around the frame perimeter. The original sealant joint between the CWS frame and the wall has cracked or separated. In Florida’s UV exposure, even quality polyurethane caulk has a 5-7 year service life before it checks and loses adhesion.
• Condensation between the glass lites. On CWS doors with integrated glass panels, a failed insulated glass unit (IGU) shows as persistent fogging you can’t wipe away. The desiccant inside the spacer has saturated, and the thermal performance of that panel is gone.
• Door sticks seasonally or after rain. Wood or composite frames absorb moisture and expand. If your CWS door operated fine in January but binds in August, the frame material is reacting to humidity swings - a sign the factory finish has failed or the frame was never fully sealed at installation.

Before

After

Replacement Cost & What’s Included

The range depends on three factors: whether the existing frame comes out cleanly or was foamed in place and needs cutting; whether the wall is block, frame, or post-Hurricane-Andrew concrete; and whether the replacement must match a homeowners association color or profile spec. Every quote we write in Boynton Beach is line-itemed: frame, hardware, sealant, labor, and disposal. The price on the measured survey is the price on the invoice - Haven Clause 1. The 365-Day Done Right Promise covers the installation, and the CWS product warranty (where OEM) or our equivalent coverage (where aftermarket) covers the materials.

DIY or Call Us?

There is one thing a CWS door owner can safely check: open the door 90 degrees, set a level on the threshold, and sight the gap between the door edge and the frame. If the gap tapers from top to bottom, the hinges have sagged - a 15-minute adjustment if you’re comfortable with a Torx driver and a helper to hold the door weight. Everything else belongs to a trained installer.

Removing a CWS impact-rated door without proper bracing risks frame racking, which voids the DP rating and can crack the adjacent wall finish. The multipoint lock hardware is under spring tension; we’ve seen homeowners strip the internal cam trying to force a misaligned bolt, turning a $400 hardware swap into a full door replacement. And the sealant joint between frame and wall is a water management detail - get the backer rod depth wrong or use the wrong modulus caulk, and water will find the gap within two rainy seasons. Sonia Raman keeps a list of every door she’s had to pull and replace because the previous installer used the wrong sealant. It is longer than she would like, and it is the reason she checks her own crew’s caulk joints before any truck leaves a site.

Call (561) 421-3844 and we’ll schedule a measured survey. You’ll keep the document, and the written price won’t change.

FAQs