Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterAwning & Hopper Windows in Boynton Beach, FL
Awning and hopper windows are hinged single-sash units that open on a horizontal axis – awning windows hinge at the top and swing outward, hopper windows hinge at the bottom and tilt inward. In Boynton Beach’s climate, both styles solve a specific ventilation problem: you get moving air without letting in the afternoon rain that rolls off the Atlantic most afternoons from June through October. At Sightline Windows & Doors Boynton Beach, our window installation team has installed these units under the Haven Standard in homes throughout Boynton Beach since 2012, and every job starts with a written price the customer keeps before any tool is lifted.
If you’re researching awning or hopper windows for your Boynton Beach home, you can reach us directly at (561) 421-3844 – a live person answers, not a voicemail. Or read through the specifics below first; the pricing ranges are on this page, in dollars, because Haven Clause 1 (Have it in writing) is the whole point of how Sightline operates.
This page sits under our broader Window Installation in Boynton Beach service, which covers every window type and opening size we work with across South Palm Beach County.
When You Need Awning or Hopper Windows
These aren’t general-purpose replacement windows. They earn their place in specific situations. Here are the scenarios we see most often across Boynton Beach:
- Bathrooms without mechanical ventilation. Florida building code requires ventilation in bathrooms, and a hopper window above a tub or shower tile line is a common compliant solution in older Boynton Beach ranches built before 1990. The inward tilt keeps rain out while the lower hinge position allows moisture-laden air to escape at ceiling level where heat accumulates.
- Kitchens and utility rooms with limited wall clearance. When a countertop, cabinet run, or dryer vent placement blocks a standard double-hung sash from sliding upward, an awning window above the obstruction gives you airflow without the clearance problem.
- Impact upgrades ahead of hurricane season. Many Boynton Beach homes built in the 1980s still carry single-pane jalousie or aluminum sliders in secondary rooms. Replacing those with impact-rated awning units from PGT or CGI brings the opening into current Florida Building Code compliance – and keeps the window operable during non-storm ventilation season.
- High-wall openings in great rooms and stairwells. Awning windows installed 8 to 10 feet up a wall vent stack heat that collects near the ceiling. The outward-swinging sash stays weather-tight during rain without requiring you to close it before a storm, which matters when the opening is above furniture or a staircase landing.
- Rooms facing interior courtyards or zero-lot-line property lines. In Boynton Beach’s townhome corridors near Gateway Boulevard and in the Renaissance Commons area, awning windows maintain privacy on tightly spaced lots while still pulling cross-ventilation through the unit.
- Condensation and mold at sill level in older frames. Boynton Beach’s year-round humidity drives sill rot faster than most homeowners expect. If you’re seeing swollen wood, soft drywall, or mold at the base of an existing hopper frame, that’s typically a glazing seal failure – not a structure problem – and a documented inspection will tell you whether resealing or full replacement is the right call.
Our Awning & Hopper Window Process
Every Sightline installation follows the same sequence, regardless of window type or opening count. For awning and hopper windows specifically, the hinge axis and sash weight distribution require a few measurement steps that differ from standard vertical sashes – the process below reflects how we handle those specifics.
- Measured Survey – the document you keep. A uniformed, background-checked Sightline technician (Haven Clause 3: Verified Crews) visits your Boynton Beach home and measures every opening to be replaced. For awning and hopper units, this includes the rough opening dimension, the existing frame depth, and the sill slope – because a slightly out-of-level sill will cause an awning sash to drift open or closed on its own if it isn’t accounted for during installation. You receive this survey in writing; it becomes the scope document.
- Written Price Before Any Work Starts. The measured survey and the final invoice are the same document at Sightline. There is no separate quote generated later by someone who wasn’t in the room. The price you see after the survey is the price you pay – Haven Clause 1, not a promotion.
- Product Specification by Opening. We specify from eight manufacturer lines. For impact-rated awning windows in Boynton Beach, PGT and CGI are the two lines we recommend most often because both carry Miami-Dade Notice of Acceptance ratings that satisfy Palm Beach County’s product approval requirements. For non-impact applications – interior utility rooms, garage bathrooms, and courtyard-facing walls that qualify for non-impact glazing under local code – ViewLux and CWS units often hit the right performance-to-cost ratio. We tell you which line fits the opening and why, in writing.
- Removal of Existing Sash and Frame Inspection. We remove the existing unit, document the rough opening condition with photographs (Haven Clause 4: Evidence on every job), and note any framing rot, fastener corrosion, or sill slope that needs correction before the new unit seats. In Boynton Beach homes near the Intracoastal – particularly in the Harbour Cove and Venetian Isles areas – salt-air corrosion on aluminum fasteners is common in frames older than 15 years and must be addressed before the new sash is set.
- Installation, Shimming, and Sealant. The new frame is shimmed level and plumb, fastened to the rough opening per the manufacturer’s installation instructions and Florida Building Code requirements, and sealed at the exterior perimeter with a continuous bead of ASTM-compliant sealant. For awning windows, we verify the sash swings the full rated arc without binding and latches positively at the closed position before moving to the next unit.
- Photo Record and 365-Day Done Right Promise. When the job is complete, a documented photo record is filed to your job record – that’s Haven Clause 4, and it’s standard, not an upsell. The 365-Day Done Right Promise covers every Sightline installation: if it’s not done right, we make it right, in writing, not as a verbal courtesy.
Before
AfterAwning & Hopper Windows Pricing in Boynton Beach
Awning and hopper windows in Boynton Beach typically run $380 to $950 per opening, installed, with most standard single-family residential replacements landing between $480 and $720. Impact-rated units carry a higher material cost than non-impact; the ranges below reflect both categories as we see them in this market.
| Window Type | Glazing Category | Installed Price Range |
|---|---|---|
| Awning – standard size (up to 36″ x 24″) | Non-impact, insulated low-E | $380 – $560 |
| Awning – standard size (up to 36″ x 24″) | Impact-rated, laminated glass | $540 – $780 |
| Awning – larger opening (up to 48″ x 36″) | Impact-rated, laminated glass | $680 – $950 |
| Hopper – standard bathroom size (up to 30″ x 18″) | Non-impact, insulated low-E | $380 – $520 |
| Hopper – standard bathroom size (up to 30″ x 18″) | Impact-rated, laminated glass | $510 – $730 |
A few factors move the number within those ranges:
- Frame material. Vinyl frames are the most common specification in Boynton Beach residential replacements. Aluminum-framed units from PGT and CGI carry a modest premium but perform better in salt-air exposure on properties east of Federal Highway.
- Rough opening condition. Sill repairs, framing rot remediation, and stucco patching around the exterior perimeter add to the total. We document these during the measured survey and price them on the same written document – no separate “we found something” call after the job starts.
- SHGC and U-factor specification. Florida Energy Code requires windows to meet a maximum Solar Heat Gain Coefficient (SHGC) of 0.25 for most conditioned spaces and a U-factor of 0.50 or better. All units we specify meet those thresholds. Higher-performance glazing packages – lower SHGC, better U-factor – cost more upfront and reduce cooling load measurably in Boynton Beach’s nine-month cooling season.
- Window count. Multi-opening jobs share mobilization cost across more units. Replacing four hopper windows in a single visit typically runs less per opening than replacing one in isolation.
- Permit fees. Palm Beach County requires a building permit for window replacement. Permit fees vary by municipality within the county; we pull the permit, and the fee is included in your written quote, not added at the end.
Bring us any written estimate from another Boynton Beach window contractor and we’ll review it at no charge – our Free Second Opinion offer has no strings attached. Call (561) 421-3844 to schedule the measured survey, which is how the written price begins.
FAQs – Awning & Hopper Windows
What’s the difference between an awning window and a hopper window?
An awning window hinges at the top and swings outward; a hopper window hinges at the bottom and tilts inward. Both open on a horizontal axis, which is what distinguishes them from double-hung or casement windows. Awning windows are more common above countertops and in high-wall positions in Boynton Beach homes because the outward swing keeps rain from entering even when the window is left open. Hopper windows tilt inward, making them standard in bathrooms and basements (less common in South Florida, but they appear in elevated slab construction) where the inward tilt fits closer to a wall without clearance on the exterior. For impact-rated applications, both configurations are available from PGT and CGI in Miami-Dade approved versions. Call (561) 421-3844 if you want us to confirm which hinge direction suits your specific opening.
Do awning or hopper windows require a permit in Boynton Beach?
Yes. Palm Beach County building code requires a permit for window replacement regardless of window type, including awning and hopper units. The permit requirement covers both impact and non-impact glazing. Sightline pulls the permit on every job; it is included in the written quote and handled before any installation begins. This matters because unpermitted window work can complicate homeowners insurance claims and property sales in Florida – a documented, permitted installation protects you on both counts.
How long does an awning or hopper window installation take?
A single awning or hopper window replacement in a Boynton Beach home typically takes two to four hours from frame removal to final sealant cure check. A four-to-six window job on the same visit usually runs a full day. The measured survey happens on a separate visit before the installation date; the installation date is scheduled only after product arrives confirmed to your written specification. We don’t schedule the install until the product is in hand – that’s how we avoid the “we’re waiting on the manufacturer” call on the day we were supposed to show up.
Can awning and hopper windows be impact-rated for Florida hurricane requirements?
Yes, impact-rated awning and hopper windows are available and are often the correct specification for Boynton Beach homes that need to meet current Florida Building Code wind-load requirements. PGT and CGI both manufacture impact-rated awning and hopper units with Miami-Dade Notice of Acceptance (NOA) ratings, which satisfy Palm Beach County’s product approval process. Impact-rated units use laminated glass – two layers of glass bonded to an interlayer that holds the pane together if it’s struck – rather than tempered glass, which shatters into fragments. If your home still has jalousie or single-pane aluminum awning windows, replacing them with impact-rated units eliminates a code deficiency and may qualify for a homeowners insurance discount; check with your carrier before the installation and we can provide the product’s NOA documentation to submit with your application.
Key Takeaways
- Awning windows hinge at the top (outward swing); hopper windows hinge at the bottom (inward tilt) – the right choice depends on opening position and clearance, not preference alone.
- Installed pricing in Boynton Beach runs $380 to $950 per opening; impact-rated units from PGT or CGI sit in the upper half of that range.
- Palm Beach County requires a permit for all window replacements; Sightline pulls it and includes the fee in your written quote.
- Every job starts with a measured survey you keep and ends with a documented photo record and the 365-Day Done Right Promise.
- Sightline has completed 18,000+ window and door installations since 2012, every one with a written price before work started.
- Free Second Opinion: bring us any competitor’s written estimate for a no-charge review.
Schedule Your Measured Survey
If you’re replacing awning or hopper windows in Boynton Beach – whether it’s one bathroom hopper or a full house of high-wall awning units, or even bay & bow windows elsewhere in the home – the process starts with a measured survey, not an estimate pulled from a clipboard in the driveway. Sightline Windows & Doors Boynton Beach sends a background-checked, uniformed technician to measure every opening, document the existing frame condition, and produce a written price on the same document. That price is the one on your invoice.
Call (561) 421-3844 to schedule your measured survey. A live person answers. If you’d prefer to start on the Sightline home page and review the full scope of what we install first, that’s a reasonable place to begin. Either way, you’ll have a written price before anyone lifts a tool.
Sonia Raman and the Sightline team serve Boynton Beach and the surrounding South Palm Beach County area. Bring us a competitor’s written quote – the Second Opinion review costs nothing.
Written by Sonia Raman, Owner at Sightline Windows & Doors Boynton Beach, serving Boynton Beach.