A Sightline company - serving Boynton Beach, FL

Before & After Gallery - Sightline Windows & Doors Boynton Beach

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

Before & after – our own jobs

Before - Recent Project — Recent Project

Before - Full Restoration — Full Restoration

After - Full Restoration — Full Restoration

Before - Complete Upgrade — Complete Upgrade

After - Complete Upgrade — Complete Upgrade

Windows & Doors Before & After in Boynton Beach, FL

Photos don’t exaggerate. A before-and-after gallery lets you see what changed: the frame condition, the sightline, the glazing performance, and the finished detail. Every project below includes the measured survey the homeowner kept, the written price we honored, and the photo record we delivered. These are real transformations in Boynton Beach neighborhoods, documented under the Haven Standard since 2012.

Call (561) 421-3844

Recent Transformations

Impact Window Replacement: Ocean Breeze Home with Salt-Deteriorated Frames

Before: deteriorated aluminum frames with salt corrosion and failed seals in Ocean Breeze, Boynton Beach — Before: Original non-impact aluminum frames with salt corrosion, failed glazing seals, and daylight visible through frame corners.

After: PGT impact-rated windows with white vinyl frames and proper sightline alignment — After: PGT WinGuard vinyl impact windows with laminated glazing, proper sightline alignment, and marine-grade hardware.

The homeowner in Ocean Breeze called after finding moisture between the panes of three original aluminum windows and frame corrosion spreading from the sill corners. We measured every opening with a laser sightline reading, recorded frame-square deviation, and specified PGT WinGuard impact-rated vinyl units with a 0.30 U-factor and 0.23 SHGC for the south-facing elevation. The written quote matched the measured survey exactly. Installation took one day. The photo record shows clean shim spacing, structural adhesive at the nailing fin, and caulk joints tooled to manufacturer spec. The 365-Day Done Right Promise covers the installation; the PGT lifetime limited warranty covers the product.

Sliding Glass Door Replacement: Canyon Isles Patio Door with Track Failure

Before: stuck sliding glass door with bent track and compromised weatherstripping in Canyon Isles — Before: Original 1990s sliding door with bent lower track, failed rollers, and weatherstripping that no longer compressed.

After: CWS impact-rated sliding patio door with tandem roller system and multi-point lock — After: CWS impact-rated sliding patio door with tandem stainless-steel roller system, multi-point lock, and thermally broken frame.

A Canyon Isles homeowner couldn’t open their patio door without lifting the panel - the track had deformed and the single rollers had flat-spotted. We found 3/8-inch frame racking and a sill pan that drained toward the interior. Our measured survey documented the rough opening, the structural header condition, and the floor elevation change. We specified a CWS impact-rated sliding door with a tandem roller system rated for 400 pounds, a thermally broken frame, and a multi-point lock with a keyed cylinder option. The written price included demolition, sill pan replacement with proper slope to exterior, and interior trim match. The door rolls on one finger now. The photo record shows the sill pan test with a water hose before trim went back on.

Energy-Efficient Window Installation: Boynton Lakes Home with West-Facing Heat Gain

Before: original single-pane windows with aluminum frames causing extreme heat gain in Boynton Lakes — Before: Original single-pane clear-glass windows with aluminum frames, no low-E coating, and conductive heat gain on west elevation.

After: ECO Window Systems double-pane windows with low-E coating and argon gas fill — After: ECO Window Systems double-pane units with soft-coat low-E, argon gas fill, and warm-edge spacer system.

The Boynton Lakes homeowner’s west-facing living room hit 84 degrees by 4 p.m. even with blinds closed. We used a thermal imaging meter on the existing single-pane aluminum units: frame surface temperature read 127 degrees. Our measured survey recorded each opening’s dimensions, wall thickness, and interior trim profile. We specified ECO Window Systems double-pane units with soft-coat low-E on surface #3, argon gas fill, and a warm-edge spacer. The SHGC dropped to 0.25 and the U-factor to 0.30. The written quote included interior trim replication with colonial stops to match the 1980s original. After installation, the same thermal meter read 89 degrees on the frame at the same time of day. The homeowner keeps the measured survey and the photo record showing glazing spec labels in every sash.

Impact Garage Door Installation: Hunters Run Home with Non-Rated Overhead Door

Before: standard non-impact garage door with no wind-load rating in Hunters Run, Boynton Beach — Before: Standard 25-gauge steel non-impact garage door with no wind-load rating, no reinforcement struts, and a failing torsion spring system.

After: Mr-Glass impact-rated garage door with wind-load certification and reinforced track system — After: Mr-Glass impact-rated garage door with wind-load certification to ASCE 7-16, reinforced track, and heavy-duty torsion spring system.

A Hunters Run homeowner’s insurance renewal required wind mitigation documentation, and the existing garage door had no impact rating or wind-load sticker. We measured the rough opening, headroom, and sideroom, then documented the existing torsion spring condition: one spring had a 6-inch gap in the coils, which is a failure waiting to happen. We specified a Mr-Glass impact-rated garage door with ASCE 7-16 wind-load certification for the Boynton Beach exposure category, reinforced 14-gauge track, and a matched torsion spring system with safety cables. The written quote included permit application, inspection scheduling, and the wind mitigation form completion. The photo record shows the door label, the track fastener pattern into the king studs, and the torsion spring winding cone orientation. This is not a DIY project - garage door springs hold lethal tension and require proper winding bars and training.

Custom Geometric Window Installation: Tivoli Reserve Entry with Transom and Sidelights

Before: standard rectangular entry door with no transom or sidelights in Tivoli Reserve — Before: Standard 3-0 x 6-8 entry door in a 5-0 x 8-0 rough opening, with plywood filling the gap and no daylighting.

After: ViewLux custom entry system with elliptical transom, full sidelights, and impact-rated decorative glass — After: ViewLux custom entry system with elliptical transom, full sidelights, impact-rated decorative glazing, and Therma-Tru fiberglass door slab.

The Tivoli Reserve homeowner had a 5-foot by 8-foot rough opening with a standard 3-foot door and plywood filler on both sides - original builder grade from 2004. We measured the opening, confirmed header capacity with a structural read, and documented the interior floor elevation relative to the sill. The design specified a Therma-Tru fiberglass door slab with a ViewLux custom elliptical transom and full sidelights with impact-rated decorative glazing in a zinc caming pattern. The written quote included the custom shop drawing for homeowner approval, the impact certification for the full assembly, and the interior trim package with rosette blocks to match existing colonial casing. The photo record shows the header reinforcement, the transom installation sequence, and the final sightline alignment of the caming pattern across all three lites. The measured survey with the approved shop drawing is the document the homeowner keeps.

Front Door Replacement: Chapel Hill with Rotten Frame and Compromised Lock Set

Before: fiberglass door with rotted wood frame and failed multi-point lock in Chapel Hill, Boynton Beach — Before: Fiberglass door slab in a rotted wood frame with a failed multi-point lock, compromised weatherstrip, and daylight at the sill.

After: Therma-Tru entry system with composite frame, multi-point lock, and adjustable sill cap — After: Therma-Tru entry system with composite frame, multi-point lock with deadbolt, and adjustable composite sill cap.

A Chapel Hill homeowner could see daylight under their front door and the deadbolt no longer threw fully into the strike. We found the wood frame rotted at the sill and hinge jamb, the multi-point lock faceplate loose, and the weatherstrip compression set to less than 1/16 inch. Our measured survey documented the rough opening, the wall thickness with stucco and interior drywall, and the floor covering transitions. We specified a Therma-Tru fiberglass door slab with a composite frame system, multi-point lock with integrated deadbolt, and an adjustable composite sill cap. The written quote included frame removal to the rough opening, new pressure-treated framing where needed, and interior trim match with backband detail. The photo record shows the frame condition at demolition, the new framing with proper shimming, and the final weatherstrip compression test with a feeler gauge. The 365-Day Done Right Promise covers the installation; the multi-point lock adjustment is documented in the photo record for future reference.

Want Results Like These?

Modern floor-to-ceiling glass bifold patio doors in a bright living space — Want Results Like These?

Every project starts with a measured survey you keep and a written price that won’t change. Call (561) 421-3844 to schedule your free estimate. Sonia Raman or a live team member will answer, 24/7. Bring us any competitor’s written quote - Haven Clause 1 means we’ll review it at no charge and show you exactly what the specification difference costs.

Written by Sonia Raman, Owner at Sightline Windows & Doors Boynton Beach, serving Boynton Beach since 2012.

Need Windows & Doors help in Boynton Beach? Licensed & insured · Written quotes before work starts response · free estimates