CGI Windows & Doors in Boynton Beach, FL

CGI Windows & Doors in Boynton Beach, FL | Sightline Windows & Doors Boynton Beach

CGI window and door service in Boynton Beach runs $180-$650 per opening depending on whether you need hardware repair, sash replacement, or full-frame removal in concrete block. We are an independent service provider, not affiliated with or authorized by CGI, and we carry aftermarket and OEM parts for the CGI models most common in Boynton Beach’s coastal condos and western subdivisions. Call (561) 421-3844 to schedule your free estimate - we bring the measured survey to you, and the written price we leave is the price you pay.

Call (561) 421-3844

Why Boynton Beach Residents Choose Us for CGI Service

We’ve worked on CGI frames along the Intracoastal corridors and throughout the western corridor near I-95 for years. That means we’ve seen how salt air pits anodized aluminum tracks on west-facing sliders, how thermal-pane seals fail in south-facing exposures, and how Century Village’s concrete-block construction changes every assumption about removal labor.

Sonia Raman, who leads our crew, grew up in Miami and learned glazing and frame installation through the building trades program at Miami Dade College before spending two decades on actual job sites. She keeps a running list of every window she’s had to pull and replace because a previous installer used the wrong sealant - it’s longer than she’d like, and it’s why she checks her own crew’s caulk joints before any truck leaves a site. In Boynton Beach, window replacement expertise matters. The salt-laden air here forgives nothing.

We stock quality aftermarket gaskets, rollers, weep covers, and sash hardware that match CGI profiles, and we source OEM components when a specific part is still available. Every technician is background-checked, uniformed, and identified by license number before arrival - Haven Clause 3, Verified Crews. The measured survey you keep, the written scope, the photo record: that’s standard, not an upsell.

Our CGI sales & service covers the full product line, but we never sell a replacement where a repair makes sense. When a CGI unit has corroded frames or failed impact glazing, we’re honest that full-frame replacement usually beats chasing parts on a 20-plus-year-old opening - especially where Florida impact code compliance is required.

Common CGI Windows & Doors Problems We Solve in Boynton Beach

• Aluminum frame and hardware corrosion near the Intracoastal. Salt-laden air pits anodized tracks, rollers, and weep-hole covers on older CGI slider and window units. We see this on west-facing exposures from Boynton Harbor Marina north through the waterfront condos - the rollers seize, the track walls erode, and the door becomes a security risk. We replace with marine-grade hardware or recommend full-frame replacement when the extrusion itself is compromised.
• Failed thermal-pane seals in CGI impact IG units. Fogging or silvery haze between the glass panes shows up frequently in the 1990s-2000s single-family subdivisions west of I-95, where the original CGI installations are now 20-plus years old. The seal failure is cosmetic at first, then thermal, then structural - the impact laminate loses its rated performance. We document the seal breach, quote the insulated glass replacement or full sash, and note whether the frame extrusion is still worth keeping.
• Weep-hole and sill-pan blockage on CGI horizontal rollers and sliders. Debris, salt crust, and failed weep covers let water back up and rot interior drywall at the jamb instead of draining out. In Boynton Beach’s heavy summer rain events, this shows up as staining at the baseboard. We clear the drainage path, replace weep covers with matching-profile aftermarket parts, and test with a calibrated water spray to confirm positive drainage before we leave.
• Vinyl sash warping and weatherstripping loss on south-facing exposures. The Florida sun cooks CGI vinyl sashes that were never designed for four decades of UV exposure. Weatherstripping compresses, corners lift, and wind-driven rain intrudes at the impact-frame gaskets. We measure the sash deflection, check corner-weld integrity, and replace with OEM or matched aftermarket sash kits when the frame pocket is still square.
• Impact-frame gasket failure at corners and meeting stiles. The rubberized gaskets that hold impact-rated glass in its frame harden, shrink, and crack - especially in units within a mile of the ocean where salt and ozone accelerate degradation. We replace gaskets to restore the wind-borne debris rating, or we document when the frame itself has lost the tolerances needed for a proper seal.

Before

After

CGI Service in Boynton Beach: What Local Conditions Mean for Your Equipment

Boynton Beach sits directly on the Intracoastal Waterway and within three miles of the Atlantic. That geography places every opening we service in Palm Beach County’s wind-borne debris region, where Florida Building Code mandates impact windows and doors in Boynton Beach or shutter-protected glazing. The persistent salt-laden air accelerates corrosion of aluminum frames, hardware, and weep holes, making product selection and finish quality - anodized versus painted versus vinyl - a real local differentiator that generic CGI pages never address.

But the factor that reshapes our workflow most is Century Village. This is one of Palm Beach County’s highest concentrations of 55+ condo communities, several thousand units built predominantly in the late 1970s and early 1980s. The original aluminum single-pane sliding glass doors and louvered jalousie windows are now 40-plus years old, fail current impact requirements, and represent Boynton Beach’s dominant replacement market. Century Village Boynton Beach association rules require board-approved window and door specs before any permit is pulled. And the community’s concrete-frame construction often means original frames were set in structural block - contractors who show up expecting a standard Florida stucco pocket find the removal labor is substantially heavier and the patching scope larger than neighboring single-family jobs. We know this because we’ve done it. In Century Village Boynton Beach, we replaced a row of CGI impact single-hung windows in a 1980s concrete-block unit where the original frames were set directly in block, not a stucco pocket, so we cut and re-poured the sill returns after the board-approved spec cleared. Our crew also swapped a corroded CGI sliding glass door on a west-facing Intracoastal-adjacent unit whose rollers had seized from salt exposure, then tested the new impact panels for drainage and wind-driven rain. That workflow - board submittal, concrete-block removal, permit coordination, inspection - is not something you learn from a manual. You learn it by doing it repeatedly in Boynton Beach.

CGI Models & Products We Service in Boynton Beach

We service the CGI models most commonly found in Boynton Beach’s housing stock:

• CGI Sentinel impact window series - the aluminum impact line found in many pre-2002 coastal installations
• CGI Series 4000/4500 vinyl impact single-hung and horizontal roller windows - common in western corridor subdivisions and some Century Village retrofits
• CGI impact sliding glass doors (2- and 3-panel) - the standard patio door in Intracoastal-adjacent condos
• CGI vinyl impact entry and French door systems - increasingly specified in HOA-approved replacement packages

We stock aftermarket gaskets, rollers, weep covers, and sash hardware matched to these profiles at our local facility, which means most Boynton Beach service calls don’t wait on shipping. When an OEM part is still available and the better choice, we source it and note the origin on your written scope. We are an independent service provider - not manufacturer-affiliated or authorized - so our recommendation is based on what the opening needs, not on a supply-chain quota.

CGI Service Pricing in Boynton Beach

FAQs - CGI Windows & Doors in Boynton Beach

Service Areas Near Boynton Beach

Our Boynton Beach service area covers the full city from the Intracoastal waterfront through the western corridor. We also work in CGI service in Lantana to the south, CGI service in Delray Beach to the north, and regularly handle jobs in Lake Worth, Greenacres, and Palm Springs. The same crew, the same measured survey, the same written price before work starts.

Book Your CGI Service in Boynton Beach Today

Call (561) 421-3844 to schedule your free estimate. A live person answers, 24/7. We’ll bring the measured survey, review your CGI units on their actual condition, and leave you a written price before any work starts. Measure it right the first time and the install is already half done.

Written by Sonia Raman, Owner at Sightline Windows & Doors Boynton Beach, serving Boynton Beach since 2012.