Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWhy Boynton Beach Homeowners Choose Mr-Glass Windows & Doors
We provide independent Boynton Beach Mr Glass service for repair, replacement, and full-frame installation - not as an authorized dealer, but as a multi-brand crew that knows the Series 1600, 2000, and impact door lines well enough to tell you honestly when a salt-damaged frame can be saved and when it cannot. Our measured surveys and written quotes follow the Haven Standard we have used since 2012: the price you see before any work starts is the price on the final invoice. Call (561) 421-3844 to schedule your free estimate.
Mr-Glass has been a practical choice in South Florida for decades - aluminum and vinyl frames built to pre-2002 and post-2002 impact codes, priced below premium lines, and widely installed in Mr Glass in Delray Beach and Boynton Beach’s condo communities and single-family subdivisions alike. The brand’s real value shows up in straightforward replacement scenarios where the opening is sound and the goal is code-compliant impact protection without overbuilding. But Mr-Glass products also have specific wear patterns in coastal Palm Beach County, and not every contractor recognizes them before quoting. We do. Sonia Raman and our crew have pulled enough failed Mr-Glass units from Intracoastal-adjacent properties to know that salt air, afternoon storm loading, and original sealant choices matter more than the sticker price ever did.
Mr-Glass Windows & Doors in Lantana, FL and Boynton Beach’s housing stock - especially the 55+ condo concentrations like Century Village - is full of original aluminum single-pane and early-impact Mr-Glass systems now past forty years of service. Those frames were set in structural concrete block, not stucco pockets, and the removal labor is heavier than most homeowners expect. We factor that into every measured survey we deliver.
Why Trust Sightline Windows & Doors Boynton Beach for Your Mr-Glass Windows & Doors?
We are not affiliated with Mr-Glass. We are an independent service provider who happens to work on their products extensively in Boynton Beach because so many owners have them. That independence is the point. A manufacturer’s rep can only sell you Mr-Glass. We can repair your Mr-Glass Series 2000 horizontal roller, replace the impact lite on your Series 1600 single-hung, or tell you - with numbers on the page - why a full-frame switch to PGT, CGI, or another line makes more sense for your specific opening and wind-load requirement.
Sonia Raman grew up in Miami, trained in glazing and frame installation through Miami Dade College’s building trades program, and spent two decades learning the rest on actual job sites. She and our crew have worked throughout Boynton Beach for years, including residential retrofits along the streets bordering Intracoastal waterways near Boynton Harbor Marina where salt air and wind load specs leave no margin for guesswork. She keeps a running list of every window she has had to pull and replace because a previous installer used the wrong sealant - it is longer than she would like, and it is the reason she checks our crew’s caulk joints before any truck leaves a site. “Measure it right the first time and the install is already half done.” That is how we work.
Every technician on our Mr-Glass calls is background-checked, uniformed, and identified by license number before arrival - Haven Clause 3, Verified Crews. The measured survey you keep, the written scope you sign, and the photo record we deliver at completion are standard, not upsells. The 365-Day Done Right Promise is stamped on every job, not offered as a courtesy.
Common Mr-Glass Windows & Doors Problems We Fix in Boynton Beach
- Series 2000 horizontal rollers that grind or stick. The tandem roller assemblies on Mr-Glass three-lite and two-lite sliders collect beach grit and salt residue until the nylon wheels flat-spot or the stainless axles seize. In Boynton Beach, this happens faster than inland Palm Beach County because afternoon storms drive sand and organic debris into the track, then the salt air crystallizes around the grease. We replace with OEM or matched aftermarket rollers, clean and level the track, and check the head track for sag - a common secondary issue on wide openings.
- Impact lite clouding or delamination in Series 1600 single-hung windows. The laminated glass in pre-2010 Mr-Glass impact units can fog at the edge seal when prolonged heat and humidity break down the interlayer adhesive. Boynton Beach’s combination of direct sun on west-facing condo walls and Intracoastal humidity accelerates this. We replace the impact lite with a new laminated unit that meets current Florida product approval, or quote full-frame replacement if the sash frame has distorted from thermal cycling.
- Sill leaks during summer storms. Mr-Glass windows and doors rely on weep holes and sill dams to manage wind-driven rain. In Boynton Beach, those weep holes clog with salt crust, insect debris, and paint overspray from decades of maintenance cycles. Water backs up, crosses the sill dam, and enters the wall. We clear the drainage path, replace compromised sill weatherstrip, and check the exterior sealant bead - which is often the original 1980s application, now hardened and gap-toothed.
- Sash lock and keeper misalignment on vinyl replacement double-hungs. Mr-Glass vinyl replacement lines use a cam-lock system that shifts as the vinyl expands and contracts through South Florida’s wet-dry seasons. After enough cycles, the lock no longer draws the sash tight against the weatherstrip. The gap seems minor until a driving rain finds it. We realign or replace the hardware and check that the interlock is seating fully - a step many installers skip.
- Corroded aluminum frames and failed anodized finishes near the water. Mr-Glass aluminum frames in Boynton Beach properties within a mile of the Intracoastal or Atlantic show pitting, chalking, and structural weakening that painted or anodized finishes were never designed to stop indefinitely. The salt-laden air penetrates failed finish at miter joints and weep slots. We assess frame wall thickness with a micrometer. If the extrusion has thinned below structural tolerance, we quote full-frame replacement rather than patch a frame that will not survive the next named storm.
Before
AfterMr-Glass Parts & Our Repair-vs-Replace Approach
We stock genuine Mr-Glass replacement parts where the manufacturer still produces them: rollers, sash locks, keepers, weatherstrip, glazing bead, and screen components for the Series 1600, 2000, and impact door lines. When Mr-Glass has discontinued a part - common on pre-2002 aluminum single-hung and jalousie systems - we source quality aftermarket equivalents and tell you exactly which one you are getting, with the spec sheet.
Our repair-vs-replace decision is straightforward. If the frame is plumb, square, and structurally sound, we repair. If the aluminum is pitted through, the vinyl is cracked at the weld, or the impact lite has delaminated in a frame that cannot accept a new glazing size, we quote full-frame replacement. We do not sell repairs that will not survive a Boynton Beach storm season. The written price you receive before any work starts includes either scope - no change orders, no surprises. Call (561) 421-3844 for your free estimate and we will walk you through which category your opening falls into.
Our Mr-Glass Service Process - Step by Step
- 1
Measured diagnosis. We arrive with the Haven Standard measured survey document, record your opening dimensions to the sixteenth of an inch, photograph the existing Mr-Glass unit, and note frame condition, hardware function, and drainage path status. You keep a copy of the survey.
- 2
Written scope and price. Before any tool is lifted, you receive a written quote that matches the survey exactly - parts, labor, disposal, and any opening rebuild if the Mr-Glass frame was set in structural block. The quote and the final invoice are the same document.
- 3
Repair or full-frame install. For repairs, we use OEM or disclosed aftermarket parts, replace components, and verify operation. For full-frame replacement, we remove the existing unit, rebuild the opening if needed (common in Boynton Beach’s concrete-block condos), install new flashing and pan, and set the replacement with proper shimming and fastening schedule.
- 4
Testing and documentation. Every repaired or replaced Mr-Glass unit is operated through full travel, lock engagement is verified, and weep holes are confirmed clear. We deliver a documented photo record of the completed work before our truck leaves.
- 5
Warranty activation. The 365-Day Done Right Promise is stamped on your paperwork. If it is not done right, we make it right.
Mr-Glass Products We Service & Install in Boynton Beach
We work on the full Mr-Glass residential line: Series 1600 impact single-hung windows for standard vertical openings; Series 2000 horizontal rollers and three-lite sliders for wide patio and balcony applications; impact French and entry door systems; and vinyl replacement double-hung windows for Window Installation retrofit applications. We stock rollers, locks, weatherstrip, and glazing components for these series locally, which keeps turnaround short on repair calls. For full-frame replacement, we specify by what the opening requires - impact rating, U-factor, SHGC, and frame material - not by what is in our warehouse. We also draw from PGT, CGI, CWS, ES Windows, ECO Window Systems, Therma-Tru, and ViewLux when a different line suits the job better.
We Also Service These Brands
Our independence is our usefulness. We repair and replace PGT, CGI, CWS, ES Windows, and the other manufacturer lines in our verified portfolio with equal fluency. A Boynton Beach owner with mixed brands across a property gets one crew, one measured survey process, and one written quote - not multiple vendor relationships.
FAQs - Mr-Glass Windows & Doors Service in Boynton Beach
No. We are an independent Mr-Glass service provider, not affiliated with or authorized by the manufacturer. We service Mr-Glass products because they are widely installed in Boynton Beach, and our multi-brand expertise lets us give you an honest assessment of repair vs. replacement without steering you toward any one line.
Usually not. Grinding and sticking in a Series 2000 horizontal roller typically means salt-cemented tandem rollers, a silt-packed track, or a sagging head track - all repairable. We pull the panels, inspect the roller condition and track alignment, and replace components if the frame is still sound. A Boynton Beach homeowner called us about exactly this issue on a three-lite slider that leaked at the sill every afternoon storm. We replaced the rollers and sill weatherstrip, cleared the weep holes, and reset the head track - the door slid smoothly again at a fraction of replacement cost. On a second Mr-Glass unit in the same house, the impact lite had clouded and the stucco opening could not accept the newer profile, so we built out the opening and set a full-frame impact unit with new flashing and pan. Call (561) 421-3844 and we will tell you which scenario yours matches.
For Series 1600 and 2000 units from the 1990s forward, yes - rollers, locks, weatherstrip, and glazing bead are generally available OEM or as quality aftermarket equivalents. For pre-1990s aluminum single-hung and jalousie systems, some parts are discontinued. We source matched aftermarket components and disclose the origin before installation. We do not guess at compatibility.
Current-production Mr-Glass impact windows and doors carry Florida product approval for the wind-borne debris region that includes Boynton Beach. Older units may not meet the current code cycle. We check the product approval label on your existing unit and verify it against the Florida Building Code edition in force for your replacement scope. If the existing unit lacks approval for the current cycle, we specify a replacement that carries it.
Insert replacement sets a new window into the existing frame, which is faster and less invasive but only works when the original frame is plumb, square, and structurally sound. Full-frame replacement removes the entire existing unit including frame, allowing proper inspection of the rough opening, replacement of flashing and pan, and correction of any settling or water damage. In Boynton Beach’s Century Village and similar concrete-block condos, full-frame is often necessary because the original aluminum frames were structurally set in block and the removal scope is substantially heavier than a stucco-pocket job. We recommend based on what we find, not what is easier to sell.
The weep holes are clogged. Mr-Glass sills depend on a clear drainage path to evacuate wind-driven rain that gets past the primary seal. In Boynton Beach, salt air crystallizes in the weep slots, afternoon storms pack them with organic debris, and decades of maintenance paint seal them shut. Water backs up, crosses the sill dam, and enters the wall. We clear the drainage path, replace the sill weatherstrip if it has compressed or hardened, and reseal the exterior bead. Call (561) 421-3844 for an exact quote - estimates are free.
Manufacturer warranties typically cover defects in materials and workmanship from the original purchase. Independent service does not void a valid warranty unless the work itself causes the damage - which is why we document every step with photos and use parts that meet or exceed OEM spec. For older Mr-Glass units whose warranty period has expired, this question is moot and our 365-Day Done Right Promise governs the work instead.
Repair calls for common issues - roller replacement, lock realignment, weatherstrip, weep hole clearing - typically run $180-$340 in the Boynton Beach market. Full-frame replacement of a standard Series 1600 single-hung with a new impact-rated unit, including disposal and basic trim, generally ranges $1,400-$2,200 per opening depending on size, floor level, and whether the original frame was set in structural block. Multi-unit condo jobs in Century Village and similar communities often qualify for volume pricing coordinated building by building. Every quote is written and line-itemed before work starts. Call (561) 421-3844 for your exact price - estimates are free.
Book Your Mr-Glass Service in Boynton Beach, FL
Call (561) 421-3844 to schedule your free estimate. A live person answers, 24/7. We will send a measured survey you keep, a written price that does not change, and a crew that knows the difference between a repairable Mr-Glass Series 2000 and a frame that belongs in the dumpster. Every job leaves a documented photo record and carries the 365-Day Done Right Promise. Haven Clause 1: have it in writing. We do.
Written by Sonia Raman, Owner at Sightline Windows & Doors Boynton Beach, serving Boynton Beach since 2012.