Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTherma-Tru Custom & Geometric Windows in Boynton Beach: What to Know First
We provide independent Therma-Tru custom and geometric window service in Boynton Beach, with most measured surveys scheduled within 48 hours and written quotes delivered before any order is placed. Custom and geometric Therma-Tru units, whether arched, circular, or oversized rectangular configurations, typically run $1,800 to $4,500 installed depending on glazing spec and frame complexity. This page is for homeowners in Boynton Beach who already own Therma-Tru products and need replacement, repair, or new custom openings matched to existing Therma-Tru sightlines. Call (561) 421-3844 to schedule your measured survey, or text us if you prefer.
How Therma-Tru Products Fail - and How We Fix Them
- Classic-Craft arched top lights with seal creep. The curved rail joint on Classic-Craft arched units we see in Boynton Beach’s Villages of Woolbright and Chapel Hill neighborhoods tends to open at the springline after five to seven years. The cause is thermal cycling against the curved geometry, not poor installation. We remove the sash, reseat the glazing tape with a backer rod compatible with Therma-Tru’s foam-core construction, and document the frame reading before reassembly.
- Smooth-Star geometric fixed lites with vinyl jamb bow. Smooth-Star’s wider geometric shapes, especially the octagonal and elongated circle profiles popular in 2018-2021 builds near Ocean Ridge, develop jamb spread when the interior vinyl expands faster than the exterior fiberglass skin. We measure the diagonals to 1/16 inch, then either shim the existing frame or specify a replacement with reinforced mullion bars if the bow exceeds 3/16 inch over the height.
- Fiber-Classic double-hung custom widths with balance system failure. The proprietary block-and-tackle balances in Fiber-Classic units sized 42 inches and wider carry more sash weight than the standard balance was specced for, particularly in coastal Boynton Beach where impact-rated laminated glass adds 40 percent more load. We source the heavy-duty balance kit from the OEM supply chain, never generic hardware-store substitutes that void the remaining warranty.
- Entry door sidelite transom combos with corner delamination. Therma-Tru’s integrated door-and-sidelite systems with geometric transoms above, common in the Tuscany and Valencia Cove developments, show corner seal failure where the transom meets the sidelite. Salt air accelerates the breakdown. We cut out the failed corner, install a preformed silicone bridge compatible with the existing glazing system, and pressure-test to 1.5 psf before signing off.
- Impact-rated custom rectangles with IG unit fogging. The oversized impact rectangles Therma-Tru produced for 2019-2022 code upgrades in Boynton Beach use a warm-edge spacer that can creep under sustained humidity above 70 percent. We see this most in homes within a half-mile of the Intracoastal. We order replacement IG units with a stainless steel spacer and dual-seal construction, then verify the sightline match against the existing stile width before fabrication.
Our Therma-Tru Custom & Geometric Windows Process
- 1
Measured survey you keep. Sonia Raman or a verified crew member arrives with a printed license number, records frame opening dimensions to 1/8 inch, notes the existing Therma-Tru series from the etch mark or profile, and leaves you the handwritten survey sheet.
- 2
Diagnostic with photo evidence. We photograph the failure point, the frame reveal, and any adjacent water staining. You receive these images by text or email within two hours.
- 3
Parts decision: OEM or validated aftermarket. For balances, corner keys, and glazing tape, we default to Therma-Tru OEM. For IG units where the OEM lead time exceeds four weeks, we specify a validated aftermarket equivalent with matching sightline and U-factor, documented in writing.
- 4
Fabrication and scheduling. Custom and geometric units ship from the fabricator to our Boynton Beach warehouse. We call to schedule install before the truck arrives, not after.
- 5
Installation with live checks. Crew verifies plumb, level, and square at rough opening and again at finish. Caulk joint is photographed before the truck leaves.
- 6
Final documentation and 365-Day Done Right Promise. You receive the completed Haven Standard packet: measured survey, written quote, photo record, and warranty card with Sonia’s direct contact.
Before
AfterWhat Therma-Tru Custom & Geometric Windows Costs in Boynton Beach
| Scenario | Typical Range |
|---|---|
| Smooth-Star geometric fixed lite, standard size, non-impact | $1,800 - $2,600 |
| Classic-Craft arched top light, impact-rated, with IG replacement | $2,800 - $4,200 |
| Fiber-Classic custom width double-hung, heavy-duty balance upgrade | $2,200 - $3,400 |
| Integrated door sidelite with geometric transom, corner rebuild | $3,200 - $4,500 |
| Oversized impact rectangle, IG unit replacement with stainless spacer | $3,600 - $4,800 |
What moves the price: impact rating versus non-impact, IG unit size and spacer spec, whether the existing frame is reusable, and access complexity for second-story geometric shapes. We do not quote by phone for custom work; the measured survey is the quote. Call (561) 421-3844 to schedule yours, or bring us a competitor’s written estimate for a free second opinion under Haven Clause 1.
Why Boynton Beach Homeowners Call Sightline Windows & Doors Boynton Beach for Therma-Tru Work
We are an independent Therma-Tru service provider, not a factory-authorized dealer, which means we source across eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - and specify by what the opening requires. Every technician is background-checked, uniformed, and identified by license number before arrival under Haven Clause 3. The 365-Day Done Right Promise is stamped on every job, not offered as a courtesy. Since 2012, we have documented 18,000+ openings with written prices before work started and photo records when finished. In Boynton Beach specifically, we have pulled and replaced windows where previous installers used the wrong sealant for the salt-air environment; Sonia Raman checks her crew’s caulk joints before any truck leaves a site. Measure it right the first time and the install is already half done.
FAQs
No, provided the work uses OEM or equivalent-spec parts and follows the manufacturer’s installation tolerances. We document every part number and torque spec so your warranty file is complete. Call (561) 421-3844 and we will review your warranty status during the measured survey.
Standard custom rectangles typically ship in three to four weeks; true geometric shapes with curved or angled rails add one to two weeks depending on the fabricator’s queue. We do not quote delivery dates we cannot verify. Call (561) 421-3844 for current lead times.
Often yes. We maintain a library of retired Therma-Tru frame profiles and have successfully matched sightlines on homes from the 2015-2018 build wave in Boynton Beach’s Quantum Park area. When a profile is truly obsolete, we specify the closest current equivalent and document the sightline difference in writing before you approve. Call (561) 421-3844 to schedule a profile match.
Replace if the frame is delaminated, the IG seal has failed and the unit is over ten years old, or the sightline no longer meets current impact code. Repair if the failure is isolated to hardware, balance, or a removable glazing component. We tell you which during the measured survey, with both options priced. Call (561) 421-3844 for an exact recommendation.
Yes, for any replacement that alters the rough opening or changes the impact rating. We handle the application, the inspection scheduling, and the final sign-off. The permit cost is listed as a line item in your written quote, not buried in overhead. Call (561) 421-3844 to confirm whether your specific job requires a permit.
Written by Sonia Raman, Owner, Sightline Windows & Doors Boynton Beach at Sightline Windows & Doors Boynton Beach, serving Boynton Beach and nearby areas.