Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Lighthouse Point, FL
Window and door installation in Lighthouse Point typically runs $650-$2,400 per opening for standard HVHZ-compliant units, with full-home projects on the city’s 1950s-70s ranch homes commonly reaching $15,000-$45,000 depending on opening count and product tier. Every job we take in this city starts with a measured survey you keep, and the written quote matches that document exactly - Haven Clause 1. Call (561) 421-3844 to schedule your free estimate.
We’re Sightline Windows & Doors, independently owned and operated under the Haven Standard since 2012. Our crews serve Lighthouse Point from our South Florida scheduling office, carrying PGT, CGI, CWS, and other HVHZ-approved product lines specified by what your opening requires, not by what we have in stock. The city’s canal-grid geography and original aluminum window stock make this one of our most specialized markets.
Why Lighthouse Point Homes Are Different
Lighthouse Point’s interior canal grid puts salt water within feet of virtually every home, not just Intracoastal properties. That marine-air exposure accelerates frame corrosion, hardware failure, and seal degradation faster than in inland Broward cities like Coconut Creek or Coral Springs. We regularly find that canal-facing rear sliders and picture windows fail simultaneously at the frame finish, sill track, and glass-to-frame seal - making repair-only approaches impractical.
The housing stock compounds this. Most homes were built between the late 1950s and early 1970s as Florida ranch and mid-century waterfront designs, and many retain original single-pane aluminum jalousie or thin-frame sliding windows that are entirely non-compliant with Broward County’s High Velocity Hurricane Zone standards. These units also predate modern energy codes, with U-factors and SHGC values that drive cooling costs up significantly in summer months. Full replacement with HVHZ-rated, corrosion-resistant hardware is the dominant job type here, not optional upgrades.
Our Main Lighthouse Point Services
Homeowners in Lighthouse Point call us most often for full-frame window replacement and HVHZ impact protection. Here’s what each service involves in this market:
Window Replacement in Lighthouse Point
We replace original aluminum jalousie and slider windows with HVHZ-compliant units from PGT, CGI, or equivalent lines, specified by your opening’s exposure and your performance tier. Every replacement includes a measured survey you keep, corrosion-resistant hardware for salt-air resistance, and a documented photo record at completion. Window Replacement in Lighthouse Point covers our full process for this city’s 1950s-70s housing stock.
Impact Windows & Doors in Lighthouse Point
Broward County’s HVHZ requirements demand the strictest impact-rated products in the country - not the standard impact glass sold in Orlando or Tampa. We specify PGT WinGuard, CGI Estate, or CWS Aegis lines by opening exposure, with laminated glass and reinforced frames that meet Florida Building Code TAS 201, 202, and 203. Impact Windows & Doors in Lighthouse Point details our HVHZ specification process.
Sliding & Patio Doors in Lighthouse Point
Canal-facing rear sliders are nearly universal in Lighthouse Point, and they’re typically the first opening to fail from salt-air exposure. We replace these with multi-panel HVHZ-rated rollers from PGT or CGI, using stainless steel hardware and sill tracks designed for marine environments. Sliding & Patio Doors in Lighthouse Point covers our measured survey and installation protocol for these high-exposure openings.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Lighthouse Point
Window installation in Lighthouse Point means working with original 1950s-70s aluminum frames that were never designed for HVHZ loads or modern energy standards. The salt-air canal environment has typically degraded the glazing compounds, corroded the hardware, and compromised the glass-to-frame seals before we arrive - making full-unit replacement with marine-grade specifications the standard approach, not the exception. We carry Window Installation expertise across eight manufacturer lines, specified by what each opening requires.
Single & Double Hung Windows
Signs you need it
Original aluminum jalousie windows that no longer seal, single-pane glass with visible salt corrosion at the edges, or frames that rattle in wind gusts off the canal.
What it costs in Lighthouse Point
Single and double hung window installation in Lighthouse Point typically ranges $850-$1,650 per opening for HVHZ-compliant vinyl or aluminum units, with premium CGI or PGT lines at the upper end.
How we do it
We measure the rough opening to 1/16 inch, specify the unit by exposure direction and canal proximity, install with corrosion-resistant fasteners and marine-grade sealant, then document with photos you receive.
Horizontal Roller Windows
Signs you need it
Sliding sashes that stick or jump their tracks, visible sill track corrosion, or failed weep holes that let canal spray pool in the frame.
What it costs in Lighthouse Point
Horizontal roller window installation in Lighthouse Point typically ranges $950-$1,850 per opening, with stainless steel roller hardware and laminated glass adding $150-$300 for direct canal exposure.
How we do it
We remove the failed unit, inspect the rough opening for salt damage, install the new roller with marine-grade sill pan and drainage, then test operation and seal integrity before photo documentation.
What Window Installation Costs in Lighthouse Point
| Item | Typical range in Lighthouse Point |
|---|---|
| Single/Double Hung (standard vinyl) | $850-$1,250 |
| Single/Double Hung (PGT/CGI aluminum) | $1,150-$1,650 |
| Horizontal Roller (standard) | $950-$1,450 |
| Horizontal Roller (marine-grade hardware) | $1,250-$1,850 |
How long does window installation take in Lighthouse Point?
Most single openings complete in 4-6 hours; full-home projects on typical Lighthouse Point ranch homes run 2-4 days depending on opening count and whether we encounter corroded rough openings requiring repair. Call (561) 421-3844 for a measured survey and exact timeline - estimates are free.
Will new windows match my home’s mid-century style?
Yes - PGT and CGI offer slim-frame profiles that preserve sightlines on 1950s-70s ranch homes, and we specify finish colors from their architectural collections to match existing trim. We document the final appearance in your photo record.
Door Installation in Lighthouse Point
Door installation in Lighthouse Point addresses hollow-core entry doors and corroded patio sliders that predate HVHZ requirements and have degraded from decades of marine-air exposure. The city’s canal grid means even side and rear doors face salt-laden humidity, so we specify corrosion-resistant multipoint locks and impact-rated glass for all exposures, not just the front entry.
Entry Doors
Signs you need it
Original hollow-core door that flexes when pressed, visible frame rot at the sill, or a single-point lock that no longer engages the strike plate.
What it costs in Lighthouse Point
Entry door installation in Lighthouse Point typically ranges $1,850-$3,400 for HVHZ-rated fiberglass or steel units with impact glass and multipoint hardware.
How we do it
We measure the jamb depth and rough opening, specify the door slab and frame by exposure direction, install with marine-grade sealant and corrosion-resistant hinges, then test lock engagement and document with photos.
Hurricane-Proof Front & Entry Doors
Signs you need it
Broward County HVHZ compliance required for permit approval, or existing door with non-impact glass that failed inspection.
What it costs in Lighthouse Point
Hurricane-proof front door installation in Lighthouse Point typically ranges $2,400-$4,200 for TAS-tested units with laminated glass and reinforced frames from Therma-Tru or PGT.
How we do it
We verify the HVHZ approval number on the product label, install to Florida Building Code fastener schedules, coordinate rough-in inspection if required, then final inspection with documented photo evidence.
What Door Installation Costs in Lighthouse Point
| Item | Typical range in Lighthouse Point |
|---|---|
| Standard entry door (fiberglass, HVHZ-rated) | $1,850-$2,800 |
| Hurricane-proof front door (laminated glass) | $2,400-$4,200 |
| Multipoint lock upgrade (corrosion-resistant) | $350-$650 |
Do you pull permits for door replacement in Lighthouse Point?
Yes - Broward County requires permits for all exterior door replacements in HVHZ zones, and we handle the application, rough-in inspection, and final inspection as standard scope. Call (561) 421-3844 to confirm your project’s permit path - estimates are free.
Can I keep my existing frame and just replace the door slab?
Rarely - original Lighthouse Point frames are typically aluminum or wood that has corroded or rotted at the sill, and HVHZ-rated slabs require reinforced frames that meet TAS impact standards. We assess this during the measured survey.
Energy-Efficient Windows in Lighthouse Point
Energy-efficient window installation in Lighthouse Point targets the original single-pane aluminum stock that dominates this city’s 1950s-70s housing, with U-factors near 1.0 and no solar heat gain control. The combination of intense south Florida sun and salt-air degradation of existing seals means cooling loads run high year-round, and modern low-E coatings with argon fill deliver measurable reductions in HVAC runtime.
Low-E & Argon Gas Glass
Signs you need it
Single-pane glass that radiates heat inward, faded flooring or upholstery near windows, or summer cooling bills that spike despite thermostat settings.
What it costs in Lighthouse Point
Low-E and argon gas glass upgrade in Lighthouse Point typically adds $80-$150 per opening to the base window cost, with payback periods of 4-7 years in this climate.
How we do it
We specify the low-E coating by orientation - soft-coat for north/east, hard-coat for south/west - with argon fill and warm-edge spacers, then verify the NFRC label ratings match your specification.
ENERGY STAR Replacement Windows
Signs you need it
Windows installed before 2010 that lack ENERGY STAR certification, or utility bills that exceed $350/month in summer for a 2,000-square-foot Lighthouse Point home.
What it costs in Lighthouse Point
ENERGY STAR replacement window installation in Lighthouse Point typically ranges $1,050-$1,750 per opening for NFRC-certified U-factor below 0.30 and SHGC below 0.25.
How we do it
We audit your existing windows’ orientation and shading, specify ENERGY STAR Most Efficient products where the opening justifies the tier, install with complete air sealing, and provide the NFRC certificate for your records.
What Energy-Efficient Windows Costs in Lighthouse Point
| Item | Typical range in Lighthouse Point |
|---|---|
| Low-E/argon upgrade (add to base window) | $80-$150 per opening |
| ENERGY STAR vinyl replacement | $1,050-$1,450 |
| ENERGY STAR aluminum (marine-grade) | $1,350-$1,750 |
Will energy-efficient windows reduce my cooling costs in Lighthouse Point?
Yes - replacing single-pane aluminum with low-E, argon-filled units typically reduces cooling load 15-25% in Lighthouse Point’s 1950s-70s ranch homes, with summer bill reductions of $60-$120 monthly for 2,000-square-foot properties. Call (561) 421-3844 for a measured survey and exact savings projection - estimates are free.
Do energy-efficient windows still meet HVHZ requirements?
Yes - we specify ENERGY STAR products from PGT and CGI that carry both NFRC energy ratings and Florida HVHZ impact certification, so you don’t trade storm protection for efficiency.
Impact Garage Doors in Lighthouse Point
Impact garage door installation in Lighthouse Point addresses a critical HVHZ compliance gap: most original garage doors on 1950s-70s homes are uninsulated, non-impact steel or wood panels that fail TAS wind-borne debris tests. The city’s canal exposure adds salt-air corrosion of tracks and springs, and garage doors are often the largest unprotected opening in the home, making them a priority for both code compliance and insurance mitigation credits.
Hurricane-Rated Garage Doors
Signs you need it
Original garage door with no HVHZ rating label, insurance renewal requiring wind mitigation upgrade, or visible panel damage from past storms.
What it costs in Lighthouse Point
Hurricane-rated garage door installation in Lighthouse Point typically ranges $2,200-$4,500 for a 16-foot double door with reinforced panels, impact-rated windows, and wind load certification to 150+ mph.
How we do it
We measure the opening and header capacity, specify the door by wind load zone and exposure category, install with reinforced track and heavy-duty spring system, then provide the Miami-Dade NOA or Florida Product Approval document.
Wind-Load Code Compliance
Signs you need it
Permit application for garage conversion or addition, insurance inspection failure, or sale of home requiring updated wind mitigation form.
What it costs in Lighthouse Point
Wind-load code compliance upgrade in Lighthouse Point typically ranges $1,800-$3,200 for structural reinforcement of existing door and track system, or $2,800-$5,500 for full replacement with HVHZ-rated unit.
How we do it
We assess the existing door’s wind load rating against current Florida Building Code requirements, engineer the reinforcement or replacement scope, pull permits, and coordinate inspection with documented photo evidence.
What Impact Garage Doors Costs in Lighthouse Point
| Item | Typical range in Lighthouse Point |
|---|---|
| Hurricane-rated garage door (16 ft, standard) | $2,200-$3,400 |
| Hurricane-rated garage door (premium, with windows) | $3,200-$4,500 |
| Wind-load reinforcement (existing door) | $1,800-$3,200 |
Does my garage door need to be HVHZ-rated if it’s not facing the canal?
Yes - Broward County’s HVHZ ordinance applies to all exterior openings regardless of orientation, and garage doors are specifically addressed in Florida Building Code R301.2.1.2 for their size and structural importance. Call (561) 421-3844 for a compliance assessment - estimates are free.
Will a new impact garage door qualify for insurance discounts?
Yes - most Lighthouse Point homeowners see wind mitigation credits of $200-$600 annually with a HVHZ-rated garage door, documented on the Uniform Mitigation Verification Inspection form we help facilitate.
Custom & Geometric Windows in Lighthouse Point
Custom and geometric window installation in Lighthouse Point serves the mid-century modern and Florida ranch homes where builders used arched, clerestory, and angled openings as architectural signatures. These original units are now 50-70 years old, with curved glass seals failed and custom aluminum frames corroded from canal exposure, and replacement requires measured templates that standard stock sizes cannot address.
Arched & Curved Windows
Signs you need it
Original arched window with visible seal failure at the curved radius, condensation between thermal panes, or frame corrosion concentrated at the sill where canal air settles.
What it costs in Lighthouse Point
Arched and curved window installation in Lighthouse Point typically ranges $1,850-$3,400 per opening, with custom radius fabrication and HVHZ-rated laminated glass adding 40-60% over standard rectangular units.
How we do it
We template the exact radius and sightline with digital measurement, fabricate the curved sash and frame to match, install with marine-grade sealant at all joints, and document the finished profile against your template.
Oversized Openings
Signs you need it
Original picture window exceeding 60 square feet with failed glass-to-frame seal, or custom clerestory bank with visible daylight around the frame perimeter.
What it costs in Lighthouse Point
Oversized opening installation in Lighthouse Point typically ranges $2,800-$5,500 per unit, with structural reinforcement, HVHZ-rated laminated glass, and crane or specialty handling for openings above 100 square feet.
How we do it
We engineer the header and sill support for modern wind loads, specify the glass by thickness and lamination for size and exposure, coordinate crane delivery if needed, and install with continuous marine-grade sealant and documented photo record.
What Custom & Geometric Windows Costs in Lighthouse Point
| Item | Typical range in Lighthouse Point |
|---|---|
| Arched window (standard radius, HVHZ-rated) | $1,850-$2,800 |
| Arched window (compound curve, premium line) | $2,600-$3,400 |
| Oversized opening (60-100 sq ft) | $2,800-$4,200 |
Can you match the original sightline of my 1960s arched windows?
Yes - we template the original sightline measurement and fabricate replacement units with slim-frame profiles from ViewLux or PGT architectural collections that preserve the glass-to-frame ratio your home was designed around. Call (561) 421-3844 for template scheduling - estimates are free.
Do custom shapes still qualify for HVHZ certification?
Yes - PGT and CGI offer TAS-tested custom radius and geometric units with Miami-Dade NOA documentation; we verify the approval number on your specific template before fabrication begins.
Brands We Service in Lighthouse Point
We specify from eight verified manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - selected by performance tier and price range, not by margin. For Lighthouse Point’s marine environment, we typically stock PGT and CGI hardware and weatherstrip components locally, with most non-standard parts available in 3-5 business days. See our brands for full specifications.
Pricing for Windows & Doors in Lighthouse Point, FL
| Service | Typical range in Lighthouse Point |
|---|---|
| Single/Double Hung Window (standard vinyl) | $850-$1,250 |
| Single/Double Hung Window (PGT/CGI aluminum) | $1,150-$1,650 |
| Horizontal Roller Window (standard) | $950-$1,450 |
| Horizontal Roller Window (marine-grade hardware) | $1,250-$1,850 |
| Entry Door (fiberglass, HVHZ-rated) | $1,850-$2,800 |
| Hurricane-Proof Front Door (laminated glass) | $2,400-$4,200 |
| ENERGY STAR Vinyl Replacement Window | $1,050-$1,450 |
| Low-E/Argon Upgrade (add per opening) | $80-$150 |
| Hurricane-Rated Garage Door (16 ft) | $2,200-$4,500 |
| Arched Window (HVHZ-rated) | $1,850-$3,400 |
| Oversized Opening (60-100 sq ft) | $2,800-$5,500 |
Prices in Lighthouse Point trend toward the upper end of these ranges when openings face direct canal exposure, require corroded rough-opening repair, or need crane handling for oversized units. The written quote you receive before any work starts matches your measured survey exactly - Haven Clause 1, no change orders.
Neighborhoods We Serve in Lighthouse Point
Our crews work throughout Lighthouse Point’s canal-grid neighborhoods, from the original 1950s ranch sections near the Hillsboro Inlet to the mid-century waterfront homes along the interior canals. Typical response time from our South Florida scheduling office is same-day or next-day for estimates, with installation scheduling based on product lead time and permit status.
- Coral Ridge Country Club Estates (Lighthouse Point section)
- Venetian Isles
- Lighthouse Manor
- Canal-side ranch homes (1950s-60s, original stock)
- Intracoastal-front properties (direct exposure, premium specifications)
Service Area - Cities Near Lighthouse Point
We serve homeowners throughout the northern Broward and southern Palm Beach corridor. Our crews regularly work in Boynton Beach, FL, Lantana, FL, Delray Beach, FL, and Lake Worth, FL, with scheduling coordinated from our South Florida office to maintain consistent arrival times and documented service records across all locations.
Serving Lighthouse Point, FL - Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Lighthouse Point
Yes - all exterior window and door replacements in Broward County’s High Velocity Hurricane Zone require permits, and Lighthouse Point enforces this through the Broward County Building Code. We handle the permit application, rough-in inspection, and final inspection as standard scope on every job.
Many Lighthouse Point neighborhoods have architectural review committees that require product samples and finish color approval before installation begins. We provide the manufacturer cut sheets, finish samples, and documented photo mockups needed for ARC submission, and we schedule installation only after written approval.
Every job is governed by the Haven Standard: a written price before any work starts (Haven Clause 1), background-checked uniformed crews with license numbers verified before arrival (Haven Clause 3), and a documented photo record you receive at completion (Haven Clause 4). The 365-Day Done Right Promise is stamped on every contract, not offered as a courtesy.
Call (561) 421-3844 to schedule your free estimate. We’ll bring a measured survey you keep, and the written quote will match it exactly.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lighthouse Point Customers Say
"Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."Good crew, tidy install, finished a day early. Paperwork had the license number on it."
- Barry L."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B.