Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Royal Palm Beach, FL
Window installation in Royal Palm Beach typically runs $650-$1,400 per opening for standard vinyl or aluminum replacement, with impact-rated products starting around $1,100 per unit and full-home retrofits on the village’s 1980s-2000s CBS tract homes commonly reaching $12,000-$28,000 depending on opening count and product tier. Most Royal Palm Beach homes were built with original single-pane aluminum frames that now fail Palm Beach County’s 140 mph wind-design requirement, making full replacement the standard recommendation over repair when insurers demand wind-mitigation documentation. Call (561) 421-3844 to schedule your free measured survey - the written quote you receive is the same document we install from, with no change orders.
Why Royal Palm Beach Homes Are Different
Royal Palm Beach is a planned village whose primary residential buildout fell between roughly 1985 and 2005, straddling Florida’s post-Hurricane Andrew building code revolution. That timing left a dense concentration of CBS tract homes with original single-pane aluminum-frame windows that predate or barely met 1994 code minimums - frames we regularly find corroding at fastener points and glazing that carries no impact rating.
Palm Beach County mandates 140 mph design-speed compliance for all window and door openings, a threshold that eliminates standard single-pane aluminum products entirely. With Florida’s property insurance crisis driving carriers to non-renew policies on homes that fail wind-mitigation inspections, Royal Palm Beach homeowners face a near-mandatory push to retrofit impact-rated products specifically to preserve coverage and earn premium credits.
The village’s heavily HOA-governed subdivisions, including Madison Green, require both a Village building permit and separate HOA Architectural Review Board approval before any replacement begins. Contractors unfamiliar with this dual-track process routinely underestimate timelines by two to four weeks, which becomes critical when a homeowner is racing an insurance non-renewal deadline. Year-round high humidity and intense UV exposure accelerate seal degradation and frame oxidation on these aging aluminum windows, producing chronic air infiltration and condensation complaints that often go unaddressed until an insurance renewal forces the issue.
Our Main Royal Palm Beach Services
These are the two services Royal Palm Beach homeowners call about most, plus sliding and patio doors for homes opening onto lanais and pool decks.
Window Replacement in Royal Palm Beach
Full-frame window replacement in Royal Palm Beach addresses the village’s widespread inventory of 20-40-year-old single-pane aluminum windows that no longer meet code or insurance requirements. We measure every opening to the sixteenth, specify impact-rated or energy-efficient products from our eight manufacturer lines, and produce a written scope that becomes your invoice - no separate quote, no change orders. The dual permit/HOA approval process in subdivisions like Madison Green is built into our timeline from the first visit. Window Replacement in Royal Palm Beach
Impact Windows & Doors in Royal Palm Beach
Impact windows and doors are the specific product tier most Royal Palm Beach homeowners need to satisfy Palm Beach County’s 140 mph wind-design requirement and secure wind-mitigation premium credits from their insurer. We specify laminated glass and reinforced frames from PGT, CGI, and CWS product lines, with each unit documented by Miami-Dade or Florida Product Approval number for permit submission. The measured survey notes your existing frame condition, fastener corrosion, and glazing type so the written scope addresses exactly what the code official and your insurance underwriter will examine. Impact Windows & Doors in Royal Palm Beach
Sliding & Patio Doors in Royal Palm Beach
Sliding and patio door replacement in Royal Palm Beach focuses on the multi-panel openings common to homes with lanais, pool access, and rear entertainment walls - areas where original aluminum sliders have suffered track wear, seal failure, and corrosion that compromises both security and wind resistance. We measure the rough opening, assess header load, and specify impact-rated multi-slide or lift-and-slide systems from ViewLux and CWS that meet county code while maintaining the sightlines these floor plans were designed around. Sliding & Patio Doors in Royal Palm Beach
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Royal Palm Beach
Window installation in Royal Palm Beach is predominantly a full-frame replacement operation on CBS tract homes built between 1983 and 2005, where original single-pane aluminum windows have reached end of service life and no longer satisfy Palm Beach County’s 140 mph wind-design requirement. The measured survey we conduct documents frame corrosion, fastener condition, and glazing type so the written scope specifies exactly what the opening needs - impact-rated vinyl or aluminum products from PGT, CGI, CWS, or ViewLux, installed with proper flashing and sealant integration to the stucco exterior. Window Installation across our South Florida service area follows the same Haven Standard: the measurement and the quote are the same document, and the photo record at completion matches both.
Single & Double Hung Windows
Signs you need it
The lower sash won’t stay open, you feel air movement at the meeting rail, or the balance shoe is visible and broken in the jamb track.
What it costs in Royal Palm Beach
Standard vinyl single-hung installation runs $650-$950 per opening; impact-rated aluminum double-hung units range $1,100-$1,650.
How we do it
We remove the sash and frame, inspect the rough opening for moisture intrusion at the sill, install the new unit with pan flashing and backer rod, then seal to the stucco with OSI Quad or equivalent.
Horizontal Roller Windows
Signs you need it
The sash drags in the track, the rollers are flat-spotted or missing, or you can lift the sash out of the frame with light pressure.
What it costs in Royal Palm Beach
Standard horizontal roller replacement costs $700-$1,050 per unit; impact-rated models with laminated glass run $1,200-$1,750.
How we do it
We pull the old sash, clean and level the sill track, set the new roller assembly with shims for proper drainage slope, and test operation before final sealant application.
What Window Installation Costs in Royal Palm Beach
| Item | Typical range in Royal Palm Beach |
|---|---|
| Standard vinyl single-hung window | $650 - $950 |
| Impact-rated aluminum double-hung | $1,100 - $1,650 |
| Impact-rated horizontal roller | $1,200 - $1,750 |
How long does window installation take in Royal Palm Beach?
A typical full-home replacement on a 3-bedroom CBS tract home takes 2-3 days of installation after permits and HOA approval are secured, which adds 2-4 weeks in Royal Palm Beach’s dual-track system. Call (561) 421-3844 for a timeline based on your specific subdivision.
Will new windows lower my insurance premium in Royal Palm Beach?
Impact-rated windows with Miami-Dade or Florida Product Approval documentation qualify for wind-mitigation premium credits through most carriers, often offsetting 15-30% of the annual premium. Call (561) 421-3844 and we will review your current policy language against the product spec we recommend.
Door Installation in Royal Palm Beach
Door installation in Royal Palm Beach centers on entry systems that satisfy Palm Beach County’s 140 mph wind-design requirement while meeting HOA Architectural Review Board specifications in subdivisions like Madison Green. Original hollow-core or un-reinforced fiberglass doors on the village’s 1985-2005 CBS homes offer no impact resistance and often show frame rot at the sill from years of humidity cycling. Door Installation through Sightline begins with a measured survey of the rough opening, jamb depth, and threshold condition, producing a written scope that specifies the exact door slab, frame, and hardware needed for code compliance and insurer documentation.
Entry Doors
Signs you need it
Daylight visible around the jamb, the slab binds seasonally, or the threshold has separated from the subfloor creating a trip hazard.
What it costs in Royal Palm Beach
Standard fiberglass entry door with composite frame runs $1,800-$3,200 installed; impact-rated steel or fiberglass systems range $2,800-$4,500.
How we do it
We remove the old unit, inspect the rough opening for moisture damage, install the pre-hung door with composite or aluminum-clad frame, integrate pan flashing, and adjust strike and sweep for proper seal compression.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your insurer has flagged the entry door in a wind-mitigation report, or the existing door lacks Miami-Dade or Florida Product Approval labeling.
What it costs in Royal Palm Beach
Impact-rated entry door systems with laminated glass sidelites or transoms run $3,500-$6,500 depending on glazing area and hardware selection.
How we do it
We specify the door assembly by Miami-Dade NOA or Florida Product Approval number, submit documentation with the Village permit application, and install with impact-rated fasteners at 6-inch centers per the approved assembly detail.
What Door Installation Costs in Royal Palm Beach
| Item | Typical range in Royal Palm Beach |
|---|---|
| Standard fiberglass entry door | $1,800 - $3,200 |
| Impact-rated entry door system | $2,800 - $4,500 |
| Impact-rated entry with sidelites/transom | $3,500 - $6,500 |
Do I need HOA approval to replace my front door in Royal Palm Beach?
Yes - subdivisions including Madison Green require separate Architectural Review Board approval before Village permit submission, and we coordinate both tracks as part of our standard scope. Call (561) 421-3844 and we will confirm your specific HOA’s documentation requirements.
Can I keep my existing sidelites with a new entry door?
Only if the sidelites carry matching Miami-Dade or Florida Product Approval numbers and are documented in the same assembly; mismatched components void the impact rating and insurer credit. Call (561) 421-3844 for an assessment of your current sidelite labeling.
Energy-Efficient Windows in Royal Palm Beach
Energy-efficient windows in Royal Palm Beach address the chronic air infiltration and solar heat gain that plague the village’s original single-pane aluminum windows, where seal degradation and frame oxidation from year-round humidity and UV exposure drive cooling loads well above modern code baseline. The same replacement that satisfies your insurer’s wind-mitigation requirement can simultaneously cut annual HVAC consumption by 12-25% when specified with Low-E coatings, argon gas fill, and thermally broken frames. Energy-Efficient Windows from Sightline are measured to the existing opening’s actual condition - not catalog sizes - and the written scope notes the U-factor and SHGC targets your home’s orientation requires.
Low-E & Argon Gas Glass
Signs you need it
Rooms with western or southern exposure feel noticeably warmer than interior spaces, or you can feel radiant heat through the glass at midday.
What it costs in Royal Palm Beach
Low-E with argon fill adds $80-$150 per opening to standard vinyl replacement, or is included in the base specification of most impact-rated product tiers.
How we do it
We specify the coating by climate zone and orientation, verify argon fill with spacer bar certification, and document U-factor and SHGC on the written scope for your records and any utility rebate application.
ENERGY STAR Replacement Windows
Signs you need it
Your current windows carry no NFRC label, or your summer electric bills exceed $300 monthly on a home under 2,500 square feet with standard insulation.
What it costs in Royal Palm Beach
ENERGY STAR certified vinyl replacement windows run $750-$1,150 per opening; impact-rated ENERGY STAR aluminum systems range $1,250-$1,850.
How we do it
We match the NFRC certified product list to your home’s specific U-factor and SHGC requirements for South Florida, install with complete air sealing at the frame perimeter, and provide the certification documentation for FPL or local utility rebate programs.
What Energy-Efficient Windows Costs in Royal Palm Beach
| Item | Typical range in Royal Palm Beach |
|---|---|
| Low-E/argon upgrade (add to base window) | $80 - $150 |
| ENERGY STAR vinyl replacement window | $750 - $1,150 |
| Impact-rated ENERGY STAR aluminum system | $1,250 - $1,850 |
Will energy-efficient windows really lower my FPL bill in Royal Palm Beach?
Properly specified and installed Low-E argon windows with U-factor below 0.30 and SHGC below 0.25 typically reduce cooling load by 12-25% on homes with original single-pane aluminum frames. Call (561) 421-3844 and we will model the payback against your last 12 months of FPL usage.
Do energy-efficient windows qualify for rebates in Royal Palm Beach?
FPL periodically offers window rebates for ENERGY STAR certified products with documented NFRC ratings; we include the required certification paperwork with every qualifying installation. Call (561) 421-3844 to confirm current rebate availability and your home’s eligibility.
Impact Garage Doors in Royal Palm Beach
Impact garage doors in Royal Palm Beach are increasingly required by insurers responding to Florida’s property insurance crisis, as the garage door is the largest opening in most homes and the most common point of catastrophic failure in a wind event. The village’s 1985-2005 CBS tract homes were typically built with non-rated steel or aluminum garage doors that do not meet Palm Beach County’s 140 mph design-speed requirement and carry no Miami-Dade or Florida Product Approval. Impact Garage Doors from Sightline are specified by wind-load rating, track gauge, and hardware schedule - not by door style alone - with the written scope documenting the exact pressure rating and fastener pattern for permit and insurance submission.
Hurricane-Rated Garage Doors
Signs you need it
Your wind-mitigation report notes the garage door as “unrated,” or the existing door lacks Miami-Dade or Florida Product Approval labeling on the interior surface.
What it costs in Royal Palm Beach
Single-car hurricane-rated steel garage doors run $2,200-$3,800 installed; double-car impact-rated systems with reinforced track and hardware range $3,500-$5,500.
How we do it
We measure the rough opening and header capacity, specify the door and track assembly by approved wind-load rating, and install with impact-rated fasteners at the jamb and header per the manufacturer’s NOA detail.
Wind-Load Code Compliance
Signs you need it
The Village of Royal Palm Beach building department has flagged your garage door replacement permit for engineering review, or your HOA requires specific wind-load documentation.
What it costs in Royal Palm Beach
Wind-load engineering analysis and permit documentation adds $400-$750 to the base door installation; we include this in our written scope when required.
How we do it
We pull the manufacturer’s Miami-Dade NOA or Florida Product Approval, complete the wind-load calculation form for Palm Beach County’s 140 mph inland zone, and submit with the permit application to avoid plan review delays.
What Impact Garage Doors Costs in Royal Palm Beach
| Item | Typical range in Royal Palm Beach |
|---|---|
| Single-car hurricane-rated steel door | $2,200 - $3,800 |
| Double-car impact-rated system | $3,500 - $5,500 |
| Wind-load engineering and permit docs | $400 - $750 |
Does my garage door need to be impact-rated in Royal Palm Beach?
Palm Beach County requires 140 mph wind-load compliance for all garage doors, and most insurers now require Miami-Dade or Florida Product Approval documentation to avoid non-renewal or exclusion. Call (561) 421-3844 and we will verify your current door’s rating from a photo of the interior label.
How long does impact garage door installation take?
Standard removal and replacement of a single or double garage door takes one day; permit submission and HOA approval in Royal Palm Beach add 2-4 weeks before installation can begin. Call (561) 421-3844 for a timeline that accounts for your specific subdivision’s approval process.
Custom & Geometric Windows in Royal Palm Beach
Custom and geometric windows in Royal Palm Beach serve the architectural detail work found in the village’s larger estate homes and upgraded tract builds, where arched transoms, octagonal accents, and oversized picture windows were installed as distinguishing features and now require replacement with impact-rated equivalents. These openings present unique challenges: curved or angled frames must be templated on site, and the limited number of manufacturers producing impact-rated geometric shapes means lead times and pricing vary significantly by complexity. Custom & Geometric Windows from Sightline are measured with full-size templates or digital site capture, with the written scope specifying the exact radius, chord dimension, or angle and the Miami-Dade or Florida Product Approval number of the proposed unit.
Geometric & Shaped Windows
Signs you need it
The original shaped window has fogged between panes, the frame has separated at the miter joints, or the glazing carries no impact rating and your insurer has flagged the opening.
What it costs in Royal Palm Beach
Standard geometric shapes - trapezoids, triangles, octagons - in impact-rated vinyl or aluminum run $1,400-$2,800 per unit depending on size and manufacturer minimums.
How we do it
We template the opening with full-size Mylar or digital measurement, submit the template to the manufacturer for shop drawing approval, and install with custom flashing kits designed for the specific angle or radius.
Arched & Curved Windows
Signs you need it
The radius window above your entry or in your stairwell shows seal failure, or the original unit was site-built and cannot be replicated with standard replacement methods.
What it costs in Royal Palm Beach
Impact-rated arched or curved windows require custom fabrication and typically range $2,500-$5,500 per opening depending on radius, height, and whether the unit is fixed or operable.
How we do it
We measure the springline, radius, and rise on site, verify the structural support for the curved header, and specify the unit from PGT or CGI custom product lines with approved assembly documentation for permit submission.
What Custom & Geometric Windows Costs in Royal Palm Beach
| Item | Typical range in Royal Palm Beach |
|---|---|
| Standard geometric shape (impact-rated) | $1,400 - $2,800 |
| Arched or curved window (impact-rated) | $2,500 - $5,500 |
| Oversized fixed picture window (impact-rated) | $3,000 - $6,000 |
Can you match my existing arched window shape exactly?
Yes - we template the opening on site and submit to manufacturers with custom capabilities; the shop drawing is approved by you and the Village before fabrication begins. Call (561) 421-3844 to schedule template measurement for your specific radius or arch configuration.
Do custom windows take longer to get permitted in Royal Palm Beach?
Custom products require manufacturer engineering letters and sometimes structural calculations for the header support, which we prepare and submit with the Village permit; add 1-2 weeks to standard permit review. Call (561) 421-3844 for a timeline based on your opening’s complexity.
Brands We Service in Royal Palm Beach
We specify from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - selected by performance tier and price range for what your opening requires, not by margin. Common hardware, balances, and weatherstrip for PGT, CGI, and CWS products are stocked locally through our Miami office, with most service calls resolved in one visit. our brands
Pricing for Windows & Doors in Royal Palm Beach, FL
| Service | Typical range in Royal Palm Beach |
|---|---|
| Standard vinyl single-hung window | $650 - $950 |
| Impact-rated aluminum double-hung | $1,100 - $1,650 |
| Impact-rated horizontal roller | $1,200 - $1,750 |
| Standard fiberglass entry door | $1,800 - $3,200 |
| Impact-rated entry door system | $2,800 - $4,500 |
| Impact-rated entry with sidelites/transom | $3,500 - $6,500 |
| ENERGY STAR vinyl replacement window | $750 - $1,150 |
| Impact-rated ENERGY STAR aluminum system | $1,250 - $1,850 |
| Single-car hurricane-rated garage door | $2,200 - $3,800 |
| Double-car impact-rated garage door system | $3,500 - $5,500 |
| Standard geometric shape (impact-rated) | $1,400 - $2,800 |
| Arched or curved window (impact-rated) | $2,500 - $5,500 |
Prices in Royal Palm Beach increase when HOA Architectural Review Board approval requires multiple revision cycles, when existing frame conditions demand rough opening repair, or when custom shapes require engineering letters. The written price you receive before any work starts is the price on the final invoice - Haven Clause 1, no change orders.
Neighborhoods We Serve in Royal Palm Beach
We serve Royal Palm Beach from our Miami-area dispatch office, with crews scheduled to minimize travel time across western Palm Beach County. Response for initial measured surveys is typically within 48-72 hours of contact.
- Madison Green
- Saratoga Lakes
- Crestwood
- Royal Palm Estates
- Baywinds
Service Area - Cities Near Royal Palm Beach
Our crews work across western Palm Beach County and adjacent communities, with measured surveys and installations coordinated from our Miami office. We regularly serve Wellington, FL to the north, Lake Worth, FL to the east, Greenacres, FL to the southeast, and West Palm Beach, FL to the northeast - all under the same Haven Standard and written-price guarantee.
Serving Royal Palm Beach, FL - Our Local Coverage Area
We’re based in the Royal Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Royal Palm Beach
The Village of Royal Palm Beach building permit typically reviews in 7-10 business days, but HOA Architectural Review Board approval in subdivisions like Madison Green adds 2-4 weeks and must precede permit submission. We build this timeline into every written scope and track both approvals as part of our standard service.
Yes - we pull the Village building permit, submit HOA documentation when required, and schedule inspections; the permit cost is itemized in your written scope, not hidden. Every completed job includes the passed inspection documentation for your insurance file.
We schedule measured surveys within 48-72 hours of contact; the survey produces the written scope and price you keep, and we do not provide verbal estimates or range guesses before seeing the opening condition. Call (561) 421-3844 to schedule your measured survey - estimates are free.
Call (561) 421-3844 to schedule your free measured survey. The written price we provide before any work starts is the same document we install from, backed by the 365-Day Done Right Promise and a documented photo record of every visit.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Royal Palm Beach Customers Say
"The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.