Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Westgate, FL
Window installation in Westgate typically runs $650-$1,400 per opening for impact-rated units, with most CBS homes from the 1950s-1970s requiring custom sizing and new buck framing to meet current Palm Beach County code. Because Westgate sits in Florida’s wind-borne debris region, every replacement window or door must carry a valid Florida Product Approval (FL#) number, not just a Miami-Dade NOA, or the permit will fail inspection. We measure every rough opening, deliver a written price before any work starts, and leave a documented photo record, the same way we’ve handled 18,000+ openings since 2012. Call (561) 421-3844 to schedule your free estimate.
Why Westgate Homes Are Different
Westgate’s housing stock is almost entirely concrete block stucco construction built between the 1950s and 1970s, with narrow rough openings sized for jalousie windows and early single-pane aluminum frames that oxidize rapidly in the salt-laden air drifting inland from the Atlantic and Intracoastal Waterway. These original units carry no impact rating, no Low-E coating, and U-factors that would not qualify for today’s energy code, which is why insurers are non-renewing or sharply raising premiums on homes without documented opening protection.
Because Westgate is unincorporated, permits route through the Palm Beach County Building Division, not a city office. We’ve seen out-of-area crews arrive with products bearing only a Miami-Dade NOA, missing the statewide FL# the county requires, resulting in failed inspections and ripped-out work. Every job we take in Westgate starts with a measured survey you keep, a written scope tied to that document, and product selections from our eight manufacturer lines specified by what the opening requires.
Our Main Westgate Services
Westgate homeowners call us most often for full-frame window replacement and impact-rated door upgrades, the two projects that address both code compliance and the insurance pressure hitting this community.
Window Replacement in Westgate
We replace original jalousie and single-pane aluminum units with impact-rated or protected openings that satisfy Palm Beach County’s wind-borne debris requirements. Most Westgate homes need custom-sized frames, new sill pans, and buck framing to adapt modern impact units to 1950s-1970s rough openings. Window Replacement in Westgate covers the full scope, from measured survey to final inspection.
Impact Windows & Doors in Westgate
Impact windows and doors are not optional in Westgate, they are code-mandated for every replacement project in the wind-borne debris region. We specify PGT, CGI, CWS, and ES Windows products by performance tier and price range, each carrying the FL# Palm Beach County requires. Impact Windows & Doors in Westgate details the product lines and permitting path.
Sliding & Patio Doors in Westgate
Original sliding glass doors in Westgate’s CBS homes rarely meet current impact or energy standards, and their aluminum frames show the same salt-air oxidation as the windows. We measure the existing opening, specify a replacement that carries the required FL#, and handle the county permit from submission to final. Sliding & Patio Doors in Westgate walks through the options and code requirements.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Westgate
Window installation in Westgate means working within narrow rough openings built for jalousie and early aluminum frames, then adapting modern impact-rated or energy-efficient units to concrete block stucco walls that have settled and shifted over sixty-plus years. Every project requires a measured survey we give you to keep, a written price derived from that document, and product selections carrying the Florida Product Approval number Palm Beach County Building Division demands for permit approval. Window Installation covers our full process across all frame types.
Single & Double Hung Windows
Signs you need it
Your original jalousie windows no longer seal against wind-driven rain, or your single-pane aluminum frames show oxidation, salt corrosion, or visible gaps at the sill.
What it costs in Westgate
Single and double hung impact window installation in Westgate typically ranges from $650 to $1,200 per opening, with custom sizing for narrow 1950s-1970s rough openings adding $150-$300 per unit.
How we do it
We measure the existing rough opening to the sixteenth, specify the frame size and buck framing required, install new sill pan flashing tied to the CBS wall, and seal with backer rod and sealant rated for the wind-borne debris region.
Horizontal Roller Windows
Signs you need it
Your existing horizontal sliders stick, the rollers have flattened, or the single-pane glass transmits enough heat to raise your cooling load measurably.
What it costs in Westgate
Horizontal roller impact window installation in Westgate runs $700-$1,300 per opening, with wider formats and custom heights for older CBS construction at the upper end of that range.
How we do it
We remove the existing frame, assess the concrete block for level and plumb, install the new impact-rated roller unit with integrated sill pan, and verify operation and lock engagement before the county inspection.
What Window Installation Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Single/Double Hung Impact Window | $650 - $1,200 |
| Horizontal Roller Impact Window | $700 - $1,300 |
| Custom sizing for narrow rough openings | $150 - $300 per unit |
Do I need impact-rated windows in Westgate?
Yes. Palm Beach County’s wind-borne debris region mandate requires impact-resistant glazing or approved shutters on all replacement windows and doors. Call (561) 421-3844 and we will review your current openings against the code.
Will my installation pass Palm Beach County inspection?
Only if the product carries a valid Florida Product Approval (FL#), not merely a Miami-Dade NOA. We verify this before ordering and include the documentation in your permit package. Call (561) 421-3844 to schedule your free estimate.
Door Installation in Westgate
Door installation in Westgate faces the same rough-opening constraints as window work, with 1950s-1970s CBS frames often requiring buck framing, new sill pans, and custom jamb depths to accommodate modern impact-rated or energy-efficient units. The salt-air oxidation that attacks aluminum windows does the same to original steel and aluminum entry doors, while insurer non-renewals are driving urgent demand for documented opening protection on every exterior door. Door Installation details our measured survey process and product lines.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your front door shows frame corrosion, the jamb is no longer square in the CBS opening, or your insurer has flagged the entry as lacking documented impact protection.
What it costs in Westgate
Hurricane-proof front door installation in Westgate ranges from $1,800 to $3,500, including impact-rated slab, reinforced jamb, and hardware meeting Florida Product Approval requirements.
How we do it
We measure the existing rough opening, specify the buck framing and jamb extension needed for your CBS wall thickness, install the impact-rated unit with integrated sill pan, and document the FL# for your permit file.
French & Double Doors
Signs you need it
Your existing French doors leak at the astragal, the single-pane glass has no Low-E coating, or the aluminum frame shows the same salt-air oxidation as your windows.
What it costs in Westgate
French and double door installation in Westgate runs $2,200-$4,500, with wider openings, sidelights, and custom heights for older CBS homes at the upper end.
How we do it
We verify the header capacity for the wider opening, specify the impact-rated French door system with multi-point locking, install integrated sill pan and jamb flashing, and test operation before scheduling county inspection.
What Door Installation Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Hurricane-Proof Front & Entry Door | $1,800 - $3,500 |
| French & Double Door System | $2,200 - $4,500 |
| Buck framing for older CBS openings | $200 - $400 per opening |
Can I use a Miami-Dade NOA door in Westgate?
No. Palm Beach County Building Division requires a Florida Product Approval (FL#) number. We verify this before ordering. Call (561) 421-3844 for a written quote on code-compliant door installation.
How long does door installation take in Westgate?
Most single entry doors complete in one day; French and double door systems with custom framing typically take two days. Call (561) 421-3844 to schedule your free estimate and receive a written timeline.
Energy-Efficient Windows in Westgate
Energy-efficient window installation in Westgate addresses the specific penalty of single-pane jalousie and early aluminum units that transmit heat, raise cooling loads, and carry no Low-E or argon gas benefit in a climate where air conditioning runs eight to ten months annually. The same salt-air oxidation that weakens frames also degrades any existing weatherstripping, while the narrow rough openings of 1950s-1970s CBS homes require careful specification to achieve code-compliant U-factors and SHGC ratings without excessive frame width. Energy-Efficient Windows explains our performance-tier approach.
Low-E & Argon Gas Glass
Signs you need it
Your single-pane windows transmit enough heat to create hot zones near glass, or your cooling bills spike during Westgate’s humid summer months.
What it costs in Westgate
Low-E and argon gas glass upgrades in Westgate add $80-$150 per opening to the base window cost, with the combined U-factor and SHGC improvement typically paying back in three to five years.
How we do it
We specify the Low-E coating and argon fill by climate zone, verify the glass package carries the FL# required for Palm Beach County, and document the U-factor and SHGC on your written quote.
ENERGY STAR Replacement Windows
Signs you need it
You want documented energy performance for resale, insurance, or utility rebate programs, or your current windows predate any energy certification.
What it costs in Westgate
ENERGY STAR replacement window installation in Westgate ranges from $750-$1,400 per opening for impact-rated units meeting the program’s U-factor and SHGC thresholds.
How we do it
We match the ENERGY STAR climate zone requirements to your orientation and shading, specify the appropriate glazing package from our manufacturer lines, and include the certification documentation in your permit package.
What Energy-Efficient Windows Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Low-E & Argon Gas Glass Upgrade | +$80 - $150 per opening |
| ENERGY STAR Impact Replacement Window | $750 - $1,400 |
| Full-frame energy upgrade with custom sizing | $900 - $1,600 |
Will energy-efficient windows lower my cooling bill in Westgate?
Yes. Replacing single-pane jalousie or early aluminum units with Low-E, argon-filled impact windows typically reduces cooling load 15-25% in Westgate’s climate. Call (561) 421-3844 for a measured survey and written estimate.
Do energy-efficient windows still need to be impact-rated?
Yes. Every replacement window in Westgate’s wind-borne debris region must be impact-rated or protected with approved shutters, regardless of energy performance. We specify products that satisfy both requirements. Call (561) 421-3844 to review options.
Impact Garage Doors in Westgate
Impact garage door installation in Westgate is increasingly urgent as insurers non-renew policies on homes lacking documented opening protection, and the garage door is often the largest unprotected opening on 1950s-1970s CBS homes. Original non-impact garage doors in Westgate’s housing stock were never designed for wind-borne debris region loads, and their frames and track systems are frequently corroded by the same salt-air infiltration that attacks windows and entry doors. Impact Garage Doors covers our wind-load specification process.
Hurricane-Rated Garage Doors
Signs you need it
Your insurer has flagged the garage door as unprotected, your current door has no wind-load rating sticker, or the frame shows rust and the track is no longer plumb.
What it costs in Westgate
Hurricane-rated garage door installation in Westgate ranges from $1,500-$3,200 for a standard single-car opening, with wind-load ratings from ES Windows and other verified lines.
How we do it
We measure the opening and header capacity, specify the wind-load rating required for your Palm Beach County exposure, install the impact-rated door with reinforced track and jamb framing, and document the FL# for permit approval.
Wind-Load Code Compliance
Signs you need it
Your permit application was rejected for insufficient garage door documentation, or you’re replacing the door as part of a larger opening-protection upgrade.
What it costs in Westgate
Wind-load code compliance upgrades for existing garage door openings in Westgate run $800-$1,800 for reinforcement, or $1,500-$3,200 for full replacement with a rated door system.
How we do it
We assess the existing frame and header against the required wind-load pressure, specify either reinforcement or full replacement, and submit the product approval documentation to Palm Beach County Building Division with your permit.
What Impact Garage Doors Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Hurricane-Rated Garage Door (single car) | $1,500 - $3,200 |
| Wind-Load Reinforcement of Existing Door | $800 - $1,800 |
| Double-car hurricane-rated system | $2,200 - $4,500 |
Does my garage door need a Florida Product Approval in Westgate?
Yes. Palm Beach County Building Division requires an FL# for every new or replacement garage door in the wind-borne debris region. We verify this before ordering. Call (561) 421-3844 for a written quote.
Can I reinforce my existing garage door or do I need full replacement?
Some existing doors can be reinforced to meet wind-load requirements; others lack the frame integrity. We assess during the measured survey and specify the path that satisfies code at the lowest verified cost. Call (561) 421-3844 to schedule.
Custom & Geometric Windows in Westgate
Custom and geometric window installation in Westgate solves the mismatch between modern impact-rated products and the irregular, narrow, or shaped openings found in 1950s-1970s CBS homes, where standard rectangles often do not fit. Arched tops, circular accents, and oversized openings that were once single-pane jalousie banks now require custom fabrication with the same FL# and impact rating as standard units, fabricated to measurements we take and you keep. Custom & Geometric Windows details our specification process for non-standard shapes.
Geometric & Shaped Windows
Signs you need it
Your home has arched, circular, or triangular windows that are currently single-pane or fixed jalousie, or you’re replacing a shaped opening with no standard product available.
What it costs in Westgate
Geometric and shaped window installation in Westgate ranges from $900-$2,000 per opening, with complex curves and custom grid patterns at the upper end.
How we do it
We template the existing opening with a full-scale pattern you approve, specify the impact-rated geometric unit from our custom-capable manufacturer lines, and fabricate to the FL# required for Palm Beach County permit.
Oversized Openings
Signs you need it
You are combining multiple small jalousie openings into one larger window, or your original opening exceeds standard maximum frame dimensions.
What it costs in Westgate
Oversized custom window installation in Westgate runs $1,200-$2,800 per opening, with structural header assessment and reinforced framing included.
How we do it
We assess the header and king stud capacity for the wider span, engineer the support if needed, specify the oversized impact-rated unit with integrated sill pan, and coordinate the structural and window permits through Palm Beach County.
What Custom & Geometric Windows Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Geometric & Shaped Window | $900 - $2,000 |
| Oversized Custom Opening | $1,200 - $2,800 |
| Structural header modification | $400 - $800 |
How long does custom window fabrication take?
Custom and geometric windows typically require four to six weeks from measured survey to delivery, plus permit time through Palm Beach County Building Division. Call (561) 421-3844 to start the templating process.
Can any window shape be made impact-rated?
Most shapes can be fabricated with impact-rated laminated glass and reinforced frames, though some extreme curves have size limits. We verify feasibility during the measured survey and show you the approved product drawings before ordering. Call (561) 421-3844 to review your opening.
Brands We Service in Westgate
We specify from eight verified manufacturer lines in Westgate: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Each product is selected by performance tier and price range for what your opening requires, not by what we have in stock. We carry common hardware and weatherstripping for faster turnaround on service calls. our brands
Pricing for Windows & Doors in Westgate, FL
| Service | Typical range in Westgate |
|---|---|
| Single/Double Hung Impact Window | $650 - $1,200 |
| Horizontal Roller Impact Window | $700 - $1,300 |
| Hurricane-Proof Front & Entry Door | $1,800 - $3,500 |
| French & Double Door System | $2,200 - $4,500 |
| Low-E & Argon Gas Glass Upgrade | +$80 - $150 per opening |
| ENERGY STAR Impact Replacement Window | $750 - $1,400 |
| Hurricane-Rated Garage Door (single car) | $1,500 - $3,200 |
| Geometric & Shaped Window | $900 - $2,000 |
| Oversized Custom Opening | $1,200 - $2,800 |
| Custom sizing for narrow rough openings | $150 - $300 per unit |
Prices in Westgate increase when custom sizing is required for 1950s-1970s narrow rough openings, when structural header modifications are needed, or when product selection moves to higher wind-load ratings. The price we write before any work starts is the price on the final invoice, Haven Clause 1, with no change orders for conditions we identified in the measured survey.
Neighborhoods We Serve in Westgate
We work across Westgate’s unincorporated Palm Beach County area, from the original 1950s subdivisions near Haverhill Road to the 1960s-1970s duplex and single-family blocks extending toward Okeechobee Boulevard. Crews dispatch from our Miami (South FL) office and typically schedule Westgate appointments within two business days of your call.
- Westgate Original Subdivision
- Haverhill Road Corridor
- Okeechobee Boulevard Area
- Westgate Heights
- Belvedere Road Vicinity
Service Area - Cities Near Westgate
Our crews serve Westgate and the surrounding Palm Beach County communities from the same measured-survey and installation operation. We also work in Boynton Beach, FL, Lantana, FL, Delray Beach, FL, and Lake Worth, FL, with the same written-price-before-work-starts standard and documented photo record on every job.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Westgate
Palm Beach County Building Division handles all permits for Westgate because it is unincorporated, not a city office. We submit the application, schedule inspections, and verify your products carry the required Florida Product Approval (FL#) before any work begins.
We typically schedule measured surveys within two business days, with installation following permit approval. Because Westgate permits route through the county rather than a city office, turnaround depends on current Palm Beach County volume, which we track and communicate.
Yes. We document every opening with photos, product approvals, and permit records you can submit to your insurer as proof of impact-rated or protected openings. The measured survey and written scope become part of your property record.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Westgate Customers Say
"Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.