Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Windows & Doors in Delray Beach, FL | Sightline Windows & Doors Boynton Beach
We provide independent Mr-Glass service across Delray Beach for homeowners whose aluminum impact frames, glazing seals, or hardware have begun to fail under salt-air exposure and Florida Building Code wind-load cycles. The one thing that makes our Mr-Glass work here different is that we have spent years addressing the specific dual-compliance challenge of historic district preservation rules alongside Palm Beach County’s 160-175 mph impact requirements, something out-of-area contractors routinely underestimate. Call (561) 421-3844 to schedule your free estimate.
Why Delray Beach Residents Choose Us for Mr-Glass Service
We are not a manufacturer-authorized dealer. We are an independent South Florida window and door company that has spent years working on Mr-Glass products across Delray Beach, so we know how their aluminum and impact lines are built, how they are trimmed, and where they tend to fail in salt air and storm conditions. Our crew carries the tools, fasteners, and marine-grade replacement hardware specific to Mr-Glass frames rather than adapting universal parts.
Sonia Raman, who leads our operation, grew up in Miami and learned glazing and frame installation through the building trades program at Miami Dade College before spending two decades on actual job sites. She and our crew have worked throughout the area for years, including residential retrofits along streets bordering Intracoastal waterways where salt air and wind load specs leave no margin for guesswork. Sonia keeps a running list of every window she has had to pull and replace because a previous installer used the wrong sealant. It is longer than she would like. That list is why she checks our crew’s caulk joints before any truck leaves a site.
Our Mr-Glass sales & service approach follows the Haven Standard we have operated under since 2012: a measured survey you keep, a written price before any work starts, and a documented photo record when the job is done. The measurement and the quote are the same document. No change orders. No verbal assurances.
We serve the full Delray Beach service area, from the barrier island east of A1A through the Lake Ida neighborhoods to the western HOA communities near Atlantic Avenue’s western extension.
Common Mr-Glass Windows & Doors Problems We Solve in Delray Beach

- Salt-air corrosion on aluminum frames - Mr-Glass aluminum frames pit and chalk at the sill and head along the A1A corridor, where direct Atlantic exposure breaks down anodized finishes faster than inland installations. We replace with marine-grade fasteners and finishes rated for salt-air environments.
- Glazing seal creep and fogging - Mr-Glass impact laminated glass units on older east-side replacements show edge seal failure after years of UV and salt exposure, particularly on west- and south-facing elevations that take the afternoon sun and prevailing winds. We use OEM-equivalent glazing cartridges rather than forcing universal seals.
- Jalousie-bay rack and infiltration - Beach cottages east of Federal Highway with original jalousie rough openings frequently have Mr-Glass impact units installed with custom shim packs; over time the fasteners loosen and the unit racks, causing air and water infiltration at the head. We square the opening and install correctly sized units with proper flashing.
- Hardware and roller degradation - Mr-Glass horizontal rollers in the Marina Historic District and Lake Ida area accumulate salt and sand grit, causing track wear, binding, and sash drop that look like frame failure but are really hardware issues. We stock OEM roller assemblies and track caps for these specific models.
- Frame corrosion beyond repair - When Mr-Glass aluminum frames have corroded through at the weep channels or head joints, particularly on pre-2010 installations near the ocean, we tell you replacement is the more sensible long-term call rather than patching a failing substrate.
Before
AfterMr-Glass Service in Delray Beach: What Local Conditions Mean for Your Equipment
Delray Beach’s designated historic districts, including the Old School Square area and the Marina Historic District, require Window Replacement in Delray Beach to pass Historic Preservation Board review for period-appropriate profiles and materials, while simultaneously satisfying Palm Beach County’s Florida Building Code impact-resistance mandates. This dual compliance challenge, balancing preservation aesthetics with 160-170+ mph wind-load engineering requirements, is a genuine local specialty that fundamentally differs from the straightforward tract-home impact-window swaps common in neighboring Boynton Beach or western Boca Raton.
For Mr-Glass owners in these districts, this means product selection is constrained before the first measurement is taken. The Historic Preservation Board will reject modern vinyl profiles or oversized frames that disrupt streetscape character, yet the Florida Building Code will reject non-impact single-pane originals. We have sourced and installed Mr-Glass aluminum impact units with slim sightlines and period-appropriate divided-lite configurations that satisfy both bodies. The documentation package we prepare includes the manufacturer’s Miami-Dade NOA (Notice of Acceptance), the wind-load calculation for the specific coastal proximity, and the preservation board’s material approval letter. We do this because a permit denial in Delray Beach costs six to eight weeks, and we have seen out-of-area contractors lose entire seasons to incomplete submittals.
Our crew was called to a 1950s CBS ranch near Lake Ida where a previous out-of-area installer had tried to fit standard-sized Mr-Glass impact units into the home’s original jalousie window bays. The narrow rough openings left the frames shimmed and racked, causing water intrusion at the head during heavy rain; we pulled the units, cut back and squared the openings, and installed correctly sized Mr-Glass horizontal roller impact windows with marine-grade fasteners and proper flashing. The homeowner told us the difference in fit and quiet during the next storm was night and day with our Impact Windows & Doors in Delray Beach. Measure it right the first time and the install is already half done.
Mr-Glass Models & Products We Service in Delray Beach

We work on the full Mr-Glass residential line, including the aluminum-frame Single Hung Impact Windows, Horizontal Roller and 3-Panel Sliding Impact Windows, Entry and Hurricane-Proof Front Door Systems, and the Vinyl Replacement Windows in double hung and picture/fixed configurations. For each, we carry OEM or OEM-equivalent glazing cartridges, roller assemblies, weatherstrip, and marine-grade hardware specific to Mr-Glass frame dimensions and fastening patterns.
We will not force a non-matching part into a frame it was not designed for. If the frame is sound and only the glass seal or hardware has failed, we repair it. If the Mr-Glass frame itself is corroded or the unit is racked from a bad prior install, we tell you replacement is the more sensible long-term call. Our Delray Beach warehouse stocks the most common Mr-Glass roller sizes and glazing cartridges for same-week turnaround on standard repairs.
Mr-Glass Service Pricing in Delray Beach
Mr-Glass window and door service in Delray Beach typically ranges from $180-$450 for hardware and seal repairs, $650-$1,400 for single-unit glass replacement in impact-rated configurations, and $2,800-$6,500 for full-frame replacement of a standard opening with new Mr-Glass impact units installed. Historic district jobs with custom profiles or jalousie-bay rough-opening modifications fall at the higher end due to additional labor and permitting documentation.
Every estimate begins with a measured survey you keep. The written quote cannot differ from that document. We also offer a free second opinion on any written estimate from another contractor. Call (561) 421-3844 for an exact quote on your specific Mr-Glass repair or replacement.
Serving Delray Beach, FL - Our Local Coverage Area

We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mr-Glass Windows & Doors in Delray Beach
Yes, but the installation must pass Historic Preservation Board review for period-appropriate profiles and materials while also meeting Palm Beach County’s 160-175 mph wind-load requirements. We have sourced Mr-Glass aluminum impact units with slim sightlines and divided-lite configurations that satisfy both bodies, and we prepare the full documentation package for permit submittal. Call (561) 421-3844 to discuss your specific property.
Direct Atlantic exposure along the A1A corridor subjects aluminum frames, hardware, and glazing seals to aggressive salt-air corrosion that dramatically shortens product lifespan. Mr-Glass anodized finishes break down faster here than inland installations because they are directly exposed to ocean spray. Marine-grade finishes and non-aluminum hardware are a practical necessity, not an upsell. Call (561) 421-3844 for an assessment of whether repair or replacement is the better path.
Usually not. The narrow rough openings originally sized for louvered blades require either custom rough-opening modifications or specially sized impact units. Out-of-area contractors who quote standard replacement pricing frequently discover the non-standard dimensions on-site, leading to shimmed, racked installations that leak. We measure the actual opening and specify the correct Mr-Glass unit or modification before ordering. Call (561) 421-3844 for a measured survey.
We repair hardware when the frame is sound. Mr-Glass horizontal rollers, track caps, and locking mechanisms are replaceable with OEM or OEM-equivalent parts we stock locally. We only recommend full unit replacement when the frame itself is corroded, the unit is racked from a bad prior install, or the glazing seal failure is coupled with frame degradation. The written quote will specify which path we are recommending and why.
Western Delray’s 1990s-2000s HOA gated communities have strict association approval processes that govern product color, profile, and style even on code-compliant replacements. We have worked with multiple Delray Beach HOAs to submit Mr-Glass product samples and specification sheets for pre-approval, avoiding the common delay of installing an unapproved door and facing a replacement order from the association.
Service Areas Near Delray Beach

We provide Mr-Glass service throughout the central Palm Beach County corridor, including Mr-Glass service in Boynton Beach to the north, Mr-Glass service in Lantana to the immediate north, and residential properties in Lake Worth, Greenacres, and Palm Springs to the west. Each area presents distinct housing stock and code considerations, and our crew carries the product knowledge and documentation practices suited to each.
Book Your Mr-Glass Service in Delray Beach Today
Call (561) 421-3844 to schedule your free estimate. A live person answers, 24/7. We will bring the measured survey, the written price, and the documented photo record. The Haven Standard has governed every one of our 18,000+ installations since 2012. It governs yours too.
Written by Sonia Raman, Owner at Sightline Windows & Doors Boynton Beach, serving Delray Beach since 2012.










Before
After
Before
After
Before
After