Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Boynton Beach, FL
Window and door installation in Boynton Beach runs $380 to $1,400 per opening depending on frame type, glazing specification, and whether the original unit was set in structural block or a standard stucco pocket. Most condo association submittals in Boynton Beach require product approval packets before permits can be pulled, which adds 10 to 14 days to the front of every job. We coordinate that paperwork as part of our measured survey, and the written quote you receive before any work starts already accounts for the removal conditions we found. Call (561) 421-3844 to schedule your free estimate.
Why Boynton Beach Homes Are Different
Boynton Beach carries one of Palm Beach County’s densest concentrations of 55-plus condo communities. Century Village alone holds several thousand units built predominantly in the late 1970s and early 1980s, and their original aluminum single-pane sliding glass doors and louvered jalousie windows are now past forty years of service. These frames fail current Florida Building Code impact requirements and corrode faster here than inland because Boynton Beach sits directly on the Intracoastal Waterway, within three miles of the Atlantic. Salt-laden air attacks aluminum hardware, weep holes, and painted finishes, so product selection between anodized, painted, or vinyl-clad frames is not cosmetic; it is a service-life decision.
Century Village association rules require board-approved window and door specs before any permit application, and the community’s concrete-frame construction means original frames were often set directly in structural block. A contractor expecting a standard Florida stucco pocket finds removal labor substantially heavier and the patching scope larger than on single-family jobs nearby. The western corridor near I-95 and the Turnpike adds 1990s to 2000s single-family subdivisions with pre-2002-code construction that may lack modern impact glazing, creating a secondary market for full-frame replacement.
Our Main Boynton Beach Services
These are the two services Boynton Beach homeowners call about most, plus the door system that dominates condo replacement schedules.
Window Replacement in Boynton Beach
Full-frame window replacement in Boynton Beach addresses the aged aluminum single-pane units common to Century Village and similar 1970s-era condos, plus the pre-impact-code vinyl windows in western subdivisions. We handle the condo association submittal package, the measured survey, and the permit coordination as a single workflow. Every job leaves a documented photo record and carries the 365-Day Done Right Promise. Window Replacement in Boynton Beach covers the complete scope.
Impact Windows & Doors in Boynton Beach
Boynton Beach lies in Palm Beach County’s wind-borne debris region, so Florida Building Code mandates impact-rated or shutter-protected openings. We specify PGT and CGI products by performance tier and price range, not by margin, and we pull permits only after association approval is documented. The measured survey notes frame depth, wall construction, and anchoring conditions so the written quote matches the final invoice. Impact Windows & Doors in Boynton Beach details the full process.
Sliding & Patio Doors in Boynton Beach
Sliding glass door replacement drives a significant share of Boynton Beach’s window-and-door market because the original 6-foot and 8-foot aluminum units in 1970s and 1980s condos have failed their rollers, locks, and weatherstripping. Multi-track 3-panel and 4-panel systems are increasingly specified for wider openings in renovated units. We measure the rough opening, note the header condition, and specify the hardware grade to the association’s requirements. Sliding & Patio Doors in Boynton Beach explains our approach.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Boynton Beach
Window installation in Boynton Beach is shaped by two dominant housing stocks: the 1970s to 1980s concrete-block condos with original aluminum single-pane windows set in structural block, and the 1990s to 2000s single-family homes in the western corridor that may carry pre-2002-code vinyl units without impact glazing. Both require measured surveys that document frame depth, wall construction, and anchoring substrate before product selection, because the removal labor and patching scope differ substantially. Our Window Installation service begins with the survey you keep and ends with the documented photo record.
Single & Double Hung Windows
Signs you need it
Sashes that no longer stay open, visible daylight through closed meeting rails, or corroded balances in original aluminum frames are the typical indicators in Boynton Beach’s older condo stock.
What it costs in Boynton Beach
Single and double hung window installation in Boynton Beach typically runs $420 to $780 per opening for vinyl-framed units with standard Low-E glazing, and $680 to $1,180 for impact-rated specifications.
How we do it
We remove the sash and frame, inspect the rough opening for block deterioration or moisture intrusion, install the new unit with corrosion-resistant fasteners rated for coastal exposure, seal with backer rod and silicone, and finish with interior trim matched to the existing reveal.
Horizontal Roller Windows
Signs you need it
Roller assemblies that grind or stick, tracks deformed from salt corrosion, or screens with torn mesh from forty years of contact are common in Boynton Beach’s original aluminum slider installations.
What it costs in Boynton Beach
Horizontal roller window installation in Boynton Beach ranges from $480 to $860 per opening for standard vinyl units, and $740 to $1,280 for impact-rated configurations with laminated glass.
How we do it
We extract the old sash and track system, verify the header and sill are level within 1/8 inch, set the new frame on composite shims, fasten through the jamb into structural substrate, and test the roller operation under load before sealing.
What Window Installation Costs in Boynton Beach
| Item | Typical range in Boynton Beach |
|---|---|
| Single/Double Hung (standard vinyl) | $420 - $780 |
| Single/Double Hung (impact-rated) | $680 - $1,180 |
| Horizontal Roller (standard vinyl) | $480 - $860 |
| Horizontal Roller (impact-rated) | $740 - $1,280 |
How long does window installation take in Boynton Beach?
Most residential window installations in Boynton Beach complete in one to two days for a typical 8-to-12-opening condo unit, though association approval and permit pulling add 10 to 14 days before work starts. Call (561) 421-3844 for a timeline based on your specific building.
Will the price change once work starts?
No. Haven Clause 1 means the measured survey and the written quote are the same document; if we encounter concealed damage, we document it, stop, and discuss options before proceeding. Call (561) 421-3844 to schedule your free estimate.
Door Installation in Boynton Beach
Both require measured surveys that document frame depth, wall construction, and header condition before product selection, because structural block walls demand different removal and anchoring strategies than standard stucco pockets. Our Door Installation service handles the full scope from survey to documented completion.
Entry Doors
Signs you need it
Daylight visible around the jamb, a slab that binds seasonally, or a frame with visible corrosion at the threshold are typical indicators in Boynton Beach’s coastal environment.
What it costs in Boynton Beach
Entry door installation in Boynton Beach ranges from $1,200 to $2,400 for fiberglass units with standard glazing, and $1,800 to $3,200 for impact-rated specifications with laminated glass.
How we do it
We remove the existing unit and inspect the rough opening for level, plumb, and square, install the pre-hung frame with composite shims and long screws into structural framing, apply flashing tape in shingle fashion, and test the lockset and sweep operation before the customer signs the completion record.
Hurricane-Proof Front & Entry Doors
Signs you need it
Current doors lack Miami-Dade or Florida Product Approval numbers, or the homeowner’s insurance requires documented wind-borne debris protection for the Boynton Beach location.
What it costs in Boynton Beach
Hurricane-proof front and entry door installation in Boynton Beach typically runs $1,800 to $3,200 for fiberglass units with impact glazing, and $2,400 to $4,000 for steel specifications with multi-point locking.
How we do it
We verify the product approval number against the Florida Building Code database, measure the rough opening including wall thickness for proper jamb depth, install with impact-rated fasteners on 6-inch centers, and provide the documentation packet for permit closeout and insurance submission.
What Door Installation Costs in Boynton Beach
| Item | Typical range in Boynton Beach |
|---|---|
| Entry Door (fiberglass, standard) | $1,200 - $2,400 |
| Entry Door (impact-rated fiberglass) | $1,800 - $3,200 |
| Hurricane-Proof Front Door (steel, multi-point) | $2,400 - $4,000 |
Do you handle condo association approvals for door replacement?
Yes. We prepare the product data submittal package, including Florida Product Approval numbers and finish samples, and coordinate directly with your association board or property manager before permit application. Call (561) 421-3844 to discuss your building’s specific requirements.
How do I know if my current door meets Boynton Beach code?
Doors installed before 2002 in Boynton Beach likely lack the Miami-Dade or Florida Product Approval required for the wind-borne debris region; we verify this during our measured survey and document the finding in writing. Call (561) 421-3844 for a free assessment.
Energy-Efficient Windows in Boynton Beach
Energy-efficient window replacement in Boynton Beach addresses two distinct thermal problems: the single-pane aluminum units in 1970s and 1980s condos that conduct heat directly through the frame and glass, and the pre-2002-code vinyl windows in western subdivisions that may carry clear double-pane glass without Low-E coating or argon fill. Both conditions drive cooling costs upward in a climate where air conditioning runs eight to ten months annually, and both are correctable with products specified by U-factor and SHGC rather than by brand name alone. Our Energy-Efficient Windows service selects glazing packages by performance tier and price range for each opening’s solar exposure.
Low-E & Argon Gas Glass
Signs you need it
Furniture or flooring faded near windows, rooms that overheat by mid-afternoon, or utility bills that spike May through October indicate inadequate solar control in Boynton Beach’s subtropical exposure.
What it costs in Boynton Beach
Low-E and argon gas glass packages in Boynton Beach add $80 to $140 per opening over clear double-pane units, or come standard in replacement windows priced from $520 to $920 depending on frame material and size.
How we do it
We measure each opening’s solar heat gain coefficient requirement based on orientation and shading, specify the appropriate Low-E coating (soft-coat for cooling-dominated climates), and verify argon fill with a spark test before installation.
ENERGY STAR Replacement Windows
Signs you need it
Windows that fail the ENERGY STAR South climate zone criteria of 0.40 or lower U-factor and 0.25 or lower SHGC, or utility bills that remain high after HVAC service, suggest the envelope is the problem.
What it costs in Boynton Beach
ENERGY STAR replacement windows in Boynton Beach range from $580 to $1,040 for vinyl-framed units with qualifying glazing packages, and $840 to $1,420 for impact-rated configurations that also meet the standard.
How we do it
We verify the NFRC label data against ENERGY STAR South zone requirements, install with continuous insulation at the frame perimeter where possible, and provide the documentation for utility rebate programs if available.
What Energy-Efficient Windows Costs in Boynton Beach
| Item | Typical range in Boynton Beach |
|---|---|
| Low-E/Argon upgrade (per opening) | $80 - $140 add-on |
| Low-E/Argon replacement window | $520 - $920 |
| ENERGY STAR vinyl replacement | $580 - $1,040 |
| ENERGY STAR impact-rated | $840 - $1,420 |
Will energy-efficient windows lower my cooling costs in Boynton Beach?
Yes. Replacing single-pane aluminum windows with Low-E, argon-filled units typically reduces cooling load 15 to 25 percent in Boynton Beach’s climate, with payback periods of 5 to 8 years depending on current HVAC efficiency. Call (561) 421-3844 for a load calculation based on your specific openings.
Do energy-efficient windows also meet impact requirements?
Many do. We specify ENERGY STAR-qualified products from PGT and CGI that carry Miami-Dade approval, so the same window addresses both thermal performance and wind-borne debris protection. Call (561) 421-3844 to review qualifying products.
Impact Garage Doors in Boynton Beach
Impact garage door replacement in Boynton Beach addresses a specific code gap: many homes built before 2002, particularly in the western corridor near I-95 and the Turnpike, carry non-rated garage doors that do not meet Florida Building Code requirements for the wind-borne debris region. A failed garage door in a hurricane creates a sudden internal pressure increase that can compromise the roof structure, so this is not a secondary opening in code terms. Our Impact Garage Doors service specifies wind-load-rated products with documented Miami-Dade or Florida Product Approval, installed with the same measured survey and written price protocol as every other opening.
Hurricane-Rated Garage Doors
Signs you need it
Current garage door lacks a Miami-Dade or Florida Product Approval sticker, or the homeowner’s wind mitigation inspection flagged the door as non-rated for the Boynton Beach location.
What it costs in Boynton Beach
Hurricane-rated garage door installation in Boynton Beach ranges from $1,800 to $3,400 for single-car steel units with wind-load reinforcement, and $2,800 to $5,200 for double-car configurations with impact-rated glazing sections.
How we do it
We measure the rough opening and verify header capacity for the increased weight of a reinforced door, specify the wind-load rating based on the home’s exposure category and design pressure, install with heavy-duty track and spring hardware, and provide the documentation for permit closeout and insurance wind mitigation credits.
Wind-Load Code Compliance
Signs you need it
Permit records show the existing garage door was installed before 2002, or a recent home inspection noted the absence of rated protection for the wind-borne debris region.
What it costs in Boynton Beach
Wind-load code compliance upgrades in Boynton Beach, including door replacement and track reinforcement, typically run $2,200 to $4,200 for single-car openings and $3,200 to $6,000 for double-car openings with full documentation.
How we do it
We pull the original permit to verify the existing door’s rating, engineer the replacement for the specific design pressure at the Boynton Beach address, install with permit and inspection coordination, and provide the signed documentation for the customer’s wind mitigation form.
What Impact Garage Doors Costs in Boynton Beach
| Item | Typical range in Boynton Beach |
|---|---|
| Hurricane-Rated Single-Car Door | $1,800 - $3,400 |
| Hurricane-Rated Double-Car Door | $2,800 - $5,200 |
| Wind-Load Compliance Upgrade (single) | $2,200 - $4,200 |
| Wind-Load Compliance Upgrade (double) | $3,200 - $6,000 |
Can I get insurance discounts for an impact-rated garage door in Boynton Beach?
Yes. Florida insurers typically offer wind mitigation credits for documented impact-rated garage doors, and we provide the signed inspection documentation required for form OIR-B1-1802. Call (561) 421-3844 to verify your current door’s rating and estimate the upgrade.
How long does impact garage door installation take?
Most impact garage door installations in Boynton Beach complete in one day, though permit pulling adds 5 to 10 days depending on Palm Beach County’s current volume. Call (561) 421-3844 to schedule your measured survey and receive a written timeline.
Custom & Geometric Windows in Boynton Beach
Custom and geometric window installation in Boynton Beach serves two distinct needs: the renovation market in Century Village and similar condos where owners want to replace dated jalousie or fixed aluminum units with shaped openings that improve light and views, and the custom single-family homes near the Intracoastal where architects specify oversized or curved glass to maximize waterfront exposure. Both require precise field measurements, structural engineering review for header modifications, and product selection from manufacturers who fabricate to shape rather than modifying standard rectangles. Our Custom & Geometric Windows service draws from ViewLux and PGT custom-capable lines, specified by what the opening requires.
Geometric & Shaped Windows
Signs you need it
Existing fixed or jalousie windows in Boynton Beach’s 1970s condos are being replaced with trapezoid, triangle, or octagon shapes as part of renovation designs, or new construction requires gable-end accent windows with specific pitch angles.
What it costs in Boynton Beach
Geometric and shaped window installation in Boynton Beach ranges from $680 to $1,400 for standard polygon shapes in vinyl frames, and $1,200 to $2,400 for impact-rated configurations with custom laminated glass.
How we do it
We field-measure the rough opening to 1/16-inch tolerance, verify the structural support for the specified shape with engineering review if required, order from the manufacturer’s custom program with approved shop drawings, and install with the same documented photo record as standard rectangular units.
Arched & Curved Windows
Signs you need it
Renovation designs call for radius-top or full-arch windows to replace flat-topped originals, or Mediterranean and coastal architectural styles specify curved glass for entryways and stairwell landings.
What it costs in Boynton Beach
Arched and curved window installation in Boynton Beach typically runs $1,400 to $2,800 for vinyl-framed radius-top units, and $2,200 to $4,200 for impact-rated curved or bent-laminated configurations.
How we do it
We create a template from the existing or designed arch, verify the radius and spring-line dimensions with the manufacturer before fabrication, coordinate the structural header modification if the arch increases the rough opening height, and install with custom jamb extensions matched to the interior finish.
What Custom & Geometric Windows Costs in Boynton Beach
| Item | Typical range in Boynton Beach |
|---|---|
| Geometric/Shaped (standard vinyl) | $680 - $1,400 |
| Geometric/Shaped (impact-rated) | $1,200 - $2,400 |
| Arched/Curved (radius-top vinyl) | $1,400 - $2,800 |
| Arched/Curved (impact-rated) | $2,200 - $4,200 |
Do custom windows take longer to install in Boynton Beach?
Yes. Custom and geometric windows typically require 4 to 8 weeks for fabrication after shop drawing approval, compared to 2 to 3 weeks for standard rectangles; we coordinate this timeline with your contractor or association schedule. Call (561) 421-3844 to plan your project timeline.
Can condo associations reject custom window shapes?
They can require design review. We prepare scaled drawings, finish samples, and Florida Product Approval documentation as part of the standard submittal package, and we do not order fabrication until written association approval is received. Call (561) 421-3844 to discuss your building’s review process.
Brands We Service in Boynton Beach
We install and service PGT, CGI, Therma-Tru, and ViewLux product lines in Boynton Beach, with parts stocked locally through our Miami-based logistics. Turnaround on standard replacement components is typically 24 to 48 hours; custom or special-order items follow manufacturer lead times. our brands
Pricing for Windows & Doors in Boynton Beach, FL
| Service | Typical range in Boynton Beach |
|---|---|
| Single/Double Hung Window (standard vinyl) | $420 - $780 |
| Single/Double Hung Window (impact-rated) | $680 - $1,180 |
| Horizontal Roller Window (standard vinyl) | $480 - $860 |
| Horizontal Roller Window (impact-rated) | $740 - $1,280 |
| Entry Door (fiberglass, standard) | $1,200 - $2,400 |
| Entry Door (impact-rated fiberglass) | $1,800 - $3,200 |
| Hurricane-Proof Front Door (steel, multi-point) | $2,400 - $4,000 |
| Low-E/Argon Replacement Window | $520 - $920 |
| ENERGY STAR Impact-Rated Window | $840 - $1,420 |
| Hurricane-Rated Single-Car Garage Door | $1,800 - $3,400 |
| Hurricane-Rated Double-Car Garage Door | $2,800 - $5,200 |
| Geometric/Shaped Window (impact-rated) | $1,200 - $2,400 |
Prices in Boynton Beach increase when original frames are set in structural block requiring heavier removal and patching, or when condo association submittal and approval coordination extends the project timeline. Haven Clause 1 means the written quote from our measured survey is the final invoice; no change orders, no surprises.
Neighborhoods We Serve in Boynton Beach
We serve window and door installation across Boynton Beach’s full residential range, from the condo communities along the Intracoastal to the single-family subdivisions west of I-95. Crews are dispatched from our Miami office with routes optimized for Palm Beach County; most Boynton Beach appointments schedule within a week of contact.
- Century Village
- Aberdeen Golf & Country Club
- Indian Spring
- Quantum Park
- Valencia Isles
Service Area - Cities Near Boynton Beach
Our crews work throughout Palm Beach County and into southern Martin County, with regular routes to Delray Beach, FL, Greenacres, FL, Boca Raton, FL, and Lake Worth, FL. Scheduling and permits are coordinated from our Miami office; all appointments include the same measured survey, written price, and documented photo record governed by the Haven Standard.
Serving Boynton Beach, FL - Our Local Coverage Area
We’re based in the Boynton Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Boynton Beach
Most Boynton Beach condo associations, including Century Village, require a submittal package with product data sheets, Florida Product Approval numbers, and finish samples before the board will approve a window or door replacement. We prepare this documentation as part of our standard workflow and do not pull permits until written approval is received.
Yes. We pull all required permits through Palm Beach County or the City of Boynton Beach depending on jurisdiction, and we schedule inspections. The permit cost is included in your written quote; no separate fees appear later.
Bring any existing contractor quotes if you want our free second opinion, your association’s approved product list if one exists, and recent utility bills if energy performance is a concern. We conduct the measured survey during the same visit and leave you with the written scope before we depart.
Call (561) 421-3844 to schedule your free estimate. Every job begins with a measured survey you keep, continues with a written price that cannot change without your approval, and ends with a documented photo record and the 365-Day Done Right Promise stamped under the Haven Standard.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Boynton Beach Customers Say
"The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.